Errata

65,524 Should Be 65,534
On page 50, in Table 2.2, the Number of Hosts for Class B should
be 65,534, not 65,524.

Class C Should Be Class B
On page 52, in the second paragraph, change: "if you
take a standard Class C network address such as 172.16.0.0," To:
"if you take a standard Class B network address such as 172.16.0.0,"

Error In Tip
On page 53, in the Tip, the equation near the bottom of the page
is represented incorrectly. Change: "128 +64 +32 +16 +8 +4 +2
+1 =240" To: "128 +64 +32 +16 +0 +0 +0 +0 =240"

Incorrect Statement About Winipcfg
On page 99, in the last paragraph, remove the following
phrase: "(which you must do by finding the file in the Windows
directory and executing it, as there is no shortcut on the Start menu)"

Corrections To Steps 5 and 9
On page 163, in step 5,Change:"step 8"To:"step 7"In step 9,Change:"003 DNS Servers"To:"006 DNS Servers"

Corrections To Steps 9 And 10
On page 213, Change: "10. Type the telephone
number of the remote access server or router on the re-mote network in the
Phone Number Or Address box and click Next to proceed to the Protocols And
Security page (see Figure 6.15). If more than one communications
device is available on the computer, a Select A Device page appears, enabling
you to choose one." To: "10. Type the telephone number of the
remote access server or router on the re-mote network in the Phone Number Or
Address box and click Next to proceed to the Protocols And Security page (see
Figure 6.15)." And on page 212, in step 9, Change: "9.
Click the Connect Using A Modem, ISDN Adapter, Or Other Physical Device option
button and click Next to proceed to the Phone Number page (see Figure
6.14). Click Connect Using Virtual Private Networking to configure a
virtual private network (VPN) link to the remote network, using either the
Point-to-Point Tunneling Protocol (PPTP) or the Layer 2 Tunneling Protocol
(L2TP). For information on VPN's, see Chapter 11, 'Using the Remote Access
Service'." To: "9. Click the Connect Using A Modem, ISDN
Adapter, Or Other Physical Device option button and click Next to proceed to
the Phone Number page (see Figure 6.14). If more than one
communications device is available on the computer, a Select A Device page
appears, enabling you to choose one. Click Connect Using Virtual
Private Networking to configure a virtual private network (VPN) link to the
remote network, using either the Point-to-Point Tunneling Protocol (PPTP) or
the Layer 2 Tunneling Protocol (L2TP). For information on VPN's, see Chapter 11,
'Using the Remote Access Service.'

"DHCP console" Should Be "DNS console"
On page 290, in step 1,Change:"DHCP console"To:"DNS console"

IFXR Should Be IXFR
On page 304, in the first paragraph,Change:"IFXR
enables the secondary..."To:"IXFR enables the secondary..."

Incorrect Step References
On page 370, in steps 10 and 11, the wrong steps are
referenced. Change: "10. Repeat steps 8 through 10 to add TCP
port numbers to the filter. 11. To create a packet filter based on
UDP port numbers, click the Permit Only option button to activate the UDP Ports
list and repeat steps 8 through 11." To: "10. Repeat steps 8
and 9 to add TCP port numbers to the filter. 11. To create a packet
filter based on UDP port numbers, click the Permit Only option button to
activate the UDP Ports list and repeat steps 8 and 9."

IP Should Be ICMP
On page 407, in step 9,Change:"...click ALL IP
Traffic"To:"...click ALL ICMP Traffic"

Correction To Remote Access Policy Evaluation
On page 444, in the first paragraph,Remove:"A
connection must be passed by all the listed policies in order to granted access
to the server"

"Authorized" Should Be "Unauthorized"
In the last paragraph on page 500,Change:"stolen
by an authorized person,"To:"stolen by an unauthorized
person,"

Incorrect Explanation Of Figure 13.12
In the first paragraph on page 518,Change:"where
you elected to store the certificate database and the certificate database
log."To:"where you elected to store the certificate database and
the request log."

Correction To Question 70-216.05.01.003's Answers
On page 699, under question 70-216.05.01.003, the correct answer
is none, instead of A and B.Change:"Correct Answers: A and
BA. Correct: Manually add the name and IP addresses of non-WINS computers
to the WINS database of static maps.B. Correct: As an alternative to
manually entering each non-WINS client, you can import the static map values
from an LMHOSTS file. Ultimately, because the non-WINS client cannot register
their information in the WINS database, you need to add this information as a
static map."To:"Correct Answers: NoneA. Incorrect: Adding
static mappings in WINS database enables WINS clients to resolve NetBIOS names
of the non-WINS clients, but it does not resolve the issue of the non-WINS
clients not able to communicate with the WINS server.B. Incorrect: Adding
static mappings in the LMHOST file enables WINS clients to resolve NetBIOS
names of the non-WINS clients, but it does not resolve the issue of the
non-WINS clients not able to communicate with the WINS server." Microsoft Press is committed to providing informative and accurate
books. All comments and corrections listed above are ready for inclusion in
future printings of this book. If you have a later printing of this book, it
may already contain most or all of the above
corrections.

Spell-Out Of MTA Is Incorrect On multiple pages, the spell out of MTA is incorrect.Change all instances of:"maximum transfer unit"To:"maximum transmission unit"

192 Should Be 1 On page 51, in the paragraph above "Private Network Addresses", Change: "or 192 to 254" To: "or 1 to 254"

Correction To Tip On page 53, in the the Tip paragraph,Remove:"However, when taking the MCSE exam, no such calculator is available, so you better know how to do it by hand."

Incorrect IP Address On page 57, in the next to the last paragraph, in the final sentence, Change: "Once again, you omit 172.21.8.0 and 172.21 15.255, because these have..." To: "Once again, you omit 172.21.8.0 and 172.21.15.255, because these have..."

Do Should Be Do Not On page 119, in the third paragraph, Change: "However, Windows CSNW and GSNW do work with TCP/IP" To: "However, Windows CSNW and GSNW do not work with TCP/IP"

Missing Text In Figure 6.5 In the three (shaded) boxes on the right side of this figure, there is missing text. In the top box, Change: "IP transmits the datagram to the designated gateway" To: "IP transmits the datagram to the designated gateway for the host address" In the middle box, Change: "IP transmits the datagram to the designated gateway for" To: "IP transmits the datagram to the designated gateway for the network address" Change:"IP locates a host address entry matching the Destination IP"To:"IP locates a host address entry matching the Destination IP address"In the bottom box, Change: "IP transmits the datagram to the default gateway" To: "IP transmits the datagram to the default gateway address" Change:"IP locates a network address entry matching the Destination IP"To:"IP locates a network address entry matching the Destination IP address"

"SVR resource record" Should Be "SRV resource record" On page 279, in the third bullet,Change:"SVR resource record"To:"SRV resource record"

NSDNAME Should Be DNSNAME On page 295, in the section Name Server (NS) in the middle of that page, Change: "The RDATA field for this resource record consists of a single NSDNAME subfield containing the name of a DNS name server." To: "The RDATA field for this resource record consists of a single DNSNAME subfield containing the name of a DNS name server."

DHCP Should Be WINS On the top of page 351, Change: "5. Restart the DHCP Server service by typing net start wins at the command prompt." To: "5. Restart the WINS Server service by typing net start wins at the command prompt."

TCP Should Be UDP On page 373, in the last bullet,Change:"Select this option to filter TCP traffic..."To:"Select this option to filter UDP traffic..."

129-Kbps Should be 128-Kbps On page 412, in the first paragraph,Change:"It is possible to combine the two B channels into one 129-Kbps data pipe"To:"It is possible to combine the two B channels into one 128-Kbps data pipe"

207 Should Be 206 On page 468, in the second paragraph,Change:"the NAT server can map all the private IP addresses on the network 192.168.0.0 to the public IP address 207.73.118.54."To:"the NAT server can map all the private IP addresses on the network 192.168.0.0 to the public IP address 206.73.118.54."

Incorrect Spell-Out Of MMC Console On page 515, in the paragraph right after the bullet points at the top of the page,Change:"As with most Microsoft Certificate Services (MMC) consoles,"To:"As with most Microsoft Management Console (MMC) consoles,"

Incorrect Answers To Question 70-216.04.01.002 On page 656, under question 70-216.04.01.002, the answers should be A and B, not A.Change:"Correct Answers: A...B. Incorrect: The correct option to set is Obtain An IP Address Automatically. When selected, this causes a DNS server to be assigned along with the other required TCP/IP values."To:"Correct Answers: A and B...B. Correct: When you select the Obtain DNS Server Address Automatically option, the Windows client computers use DNS configuration information provided by the DHCP server."