
Requirements For Network Address Translation in Remote Access Networks • Chapter 10 447
Figure 10.10 Easy IP.
1. First, let’s configure the Easy IP router as a DHCP server to allo-
cate IP addresses to local hosts on the 10.1.1.0 subnet.
NOTE
The DHCP server functionality is available starting in release 12.0(1)T. The
following routers and access servers are supported: Cisco 700, 1000,
1600, 1700 [requires 12.0(2)T], 2500, 3600, 3800, 4000, AS5100,
AS5200, 7000, and 7200 series.
2. The router will store the DHCP bindings information on a remote
FTP server (TFTP and remote copy protocol (RCP) servers can also
be used). In our example, the FTP server’s IP ...