CCIE Routing and Switching Practice Labs

Section 2: IP IGP Protocols (30 Points)

Section 2.1: OSPF (11 Points)

• Configure OSPF according to the diagram in Figure 4-10. R1-s0/1, R2-s0/1, R4-s0/1, and R5-s0/1 are to be part of the OSPF area 0.

• R2-s0/0 and R3-S0/0 are to be configured as OSPF area 1.

• R1-e0/0 is to be configured as OSPF area 11.

• R1-e0/1, R3-fa0/0, R3-bri0/0, R5-fa0/0, R5 fa0/1, R5-bri0/0, and R6-e0/0 are to be configured as OSPF area 22.

• R3-fa0/1 is to be configured as OSPF area 33.

If you configured this correctly as shown in Example 4-20 through Example 4-25 you have scored 6 points:

• Configure the loopback addresses to be part of the OSPF process.

If you configured this correctly as shown in Example 4-20 through Example 4-25 you have scored 2 points:

• Make sure you are able ...