Scenario 2-1: Routing IP on Cisco Routers
Figure 2-21 displays a network with one Cisco router and two directly attached Ethernet interfaces. Use Figure 2-21 to answer the following questions.
Figure 2-21. Scenario Diagram
|1:||In Figure 2-21, PC1 cannot communicate with PC2. What is the likely cause of the problem assuming that the router is configured correctly?
Router R1 requires a routing protocol to route packets from Ethernet0 to Ethernet1.
There is a problem with the IP address configuration on Router R1.
The gateway address on PC1 is wrong.
The gateway address on the router is wrong.
|2:||In Figure 2-21, what will be the ping response display when ...|