To define hops in the path for the Tag Switching tunnel, use the tunnel tsp-hopinterface configuration command. Use the no form of this command to remove these hops.
tunnel tsp-hop hop-number ip-address [lasthop]
no tunnel tsp-hop hop-number ip-address [lasthop]
|hop-number||The sequence number of the hop being defined in the path. The first number is 1, which identifies the hop just after the head hop.|
|ip-address||The IP address of the input interface on that hop.|
|lasthop||(Optional) Indicates that the hop being defined is the final hop in the path (the tunnel destination).|
No hops are defined.
This command first appeared in Cisco ...