traffic-shape fecn-adapt — interface
traffic-shape fecn-adapt no traffic-shape fecn-adapt
Traffic shaping on a frame relay subinterface
This command enables the interface to reflect FECN bits as BECN bits, which notifies the sending DTE that it is transmitting at a rate too fast to handle.
This configuration sets up traffic shaping with an upper limit of 128 Kbps and a lower limit of 64 Kbps. With the
fecn-adapt command, our router reflects FECN packets as BECN packets.
interface serial 1 encapsulation frame-relay interface serial 1.1 traffic-shape rate 128000 traffic-shape adaptive 64000