
208 DS8800 Performance Monitoring and Tuning
(Figure 6-50). If the servers use different Fibre Channels than the Fibre Channels that are
specified, update this information.
Select and determine the Remote Copy Interfaces. You need to select the Remote Copy
type and the connections used for the Remote Copy links.
Figure 6-49 Open Systems target interfaces from server
Figure 6-50 Open Systems target interfaces from disk subsystem
6. To select the DDM capacity and rpm used, click the Open Disk tab in Figure 6-51 on
page 209. Then, select the DDM used by clicking Add. Select the HDD type used
(146GB/15K rpm) and the RAID type (RAID 5), and enter ca ...