Once you have built the example, you can deploy it to your hardware. First, you need to make sure that the deployment properties are set as shown in Figure 1-3. To do this, perform the following steps:
In the Solution Explorer, right-click on the HelloWorld project (just below the text “Solution ‘HelloWorld’ (1 project)”), then select Properties in the menu. The tab shown in Figure 1-3 will open.
Figure 1-3. Project properties
On the left side, click on the .NET Micro Framework tab, which results in the dialog box shown in Figure 1-4. Make sure that the properties are set up as follows:
Configuration: Active (Debug)