146 IBM System Storage DS3500 Introduction and Implementation Guide
11.Optionally, verify the installation by running the command rpm -qa |grep SM and look for
the following RPM packages in the installed package list:
SMclient-10.70.G5.08-1.noarch
SMesm-10.70.G5.02-1.noarch
SMruntime-10.70.A5.00-1.i586
5.2.3 Installing DS Storage Manager using a text console
It is possible to install the IBM Systems Storage DS Storage Manager without any graphical
interface by using the console mode installation. After installing the Storage Manager Agent,
the system can be managed from any host that has the client installed and a network
connection to this server.
To install using a text console, perform the following steps:
1. Start the installer with the option -i console. Select the locale (the default is English), and
press Enter as shown in Example 5-2
Example 5-2 Text based installation
# sh SMIA-LINUX-10.70.A5.08.bin -i console
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
Preparing CONSOLE Mode Installation...
===============================================================================
Choose Locale...
----------------
1- Deutsch
->2- English
3- Español
4- Francais
5- Italiano
6- Portugues (Brasil)
CHOOSE LOCALE BY NUMBER:
2. Read the introduction and press Enter to proceed.
3. Read the copyright statement, press Enter to continue to the following page, and press Y
to accept it.
4. Choose the type of installation to perform as shown in Example 5-3. A full installation
installs the Storage Manager Client, Utilities, and Agent. The option Management Station
will install the Storage Manager Client and Utilities, and the option Host will install only the
Storage Manager Agent. Press 4 for Custom and press Enter.
Example 5-3 Installation type
Select Installation Type
------------------------
Chapter 5. Installing IBM System Storage DS Storage Manager 147
Choose the Install Set to be installed by this installer.
->1- Typical (Full Installation)
2- Management Station
3- Host
4- Customize...
ENTER THE NUMBER FOR THE INSTALL SET, OR PRESS <ENTER> TO ACCEPT THE DEFAULT
:
5. In this custom installation panel, we can select or deselect individual components. By
default, all components are be selected and you can deselect the component by entering
the number associated with the component you do not want to install. Here we only
choose the DS Storage Manager 10 Client as shown in Example 5-4.
Example 5-4 Choose Product Features
Choose Product Features
-----------------------
ENTER A COMMA_SEPARATED LIST OF NUMBERS REPRESENTING THE FEATURES YOU WOULD
LIKE TO SELECT, OR DESELECT. TO VIEW A FEATURE'S DESCRIPTION, ENTER
'?<NUMBER>'. PRESS <RETURN> WHEN YOU ARE DONE:
1- [X] DS Storage Manager 10 Client
2- [ ] Support Monitor
3- [ ] DS Storage Manager 10 Utilities
4- [ ] DS Storage Manager 10 Agent
Choose the Features to be installed by this installer:
6. Confirm the pre-installation summary and press Enter as shown in Example 5-5.
Example 5-5 Storage Manager - Pre-installation summary
Pre-Installation Summary
------------------------
Review the Following Before Continuing:
Install Folder:
/opt/IBM_DS
Product Components:
IBM System Storage DS3000 Storage Manager 3 Client,
IBM System Storage DS3000 Storage Manager 3 Utilities
Required Disk Space
632 MB
Available Disk Space
506 MB
PRESS <ENTER> TO CONTINUE:

Get IBM System Storage DS3500 Introduction and Implementation Guide now with O’Reilly online learning.

O’Reilly members experience live online training, plus books, videos, and digital content from 200+ publishers.