Innovation in Design, Communication and Engineering

Table of contents

1. Front Cover
2. Table of contents (1/2)
3. Table of contents (2/2)
4. Editorial
5. Advanced material science & engineering
   1. The characteristic of Ga-doped ZnO nanorods photodetectors
   2. Deposition of In2O3-Al2O3-SnO2 (IATO) transparent conduction thin films using non-vacuum method
   3. Deposition of ZnO-In2O3-Ga2O3 (IGZO) thin films by using Spray Coating Method
   4. Growth of Fe2O3 thin films and Fe2O3-doped ZnO micron-flower by using modified Spray Coating Method
   5. Green molding compounds for encapsulating microelectronic devices
   6. Investigation of a plastic injected container of PCM for temperature rapid–balancing and long–maintaining
   7. Study on using commercial touch panel film as the gate electrode for ISFET-based pH sensor (1/2)
   8. Study on using commercial touch panel film as the gate electrode for ISFET-based pH sensor (2/2)
   9. Thermoelectric properties of the difference between Zn3.9Sb3 and Zn4Sb3
   10. Investigation of effective parameters on mechanical property in nanoindentation of polymer/carbon nanotubes nanocomposite using square representative volume element (1/2)
   11. Investigation of effective parameters on mechanical property in nanoindentation of polymer/carbon nanotubes nanocomposite using square representative volume element (2/2)
   12. The performance of polymer solar cells by various fabrication parameters and ITO
   13. The impact on ITO by wet etching for flexible organic solar cells
   14. Grain refinement of Ti-6Al-4V alloy by cyclic hydrogenation and subsequent solution treatment (1/2)
   15. Grain refinement of Ti-6Al-4V alloy by cyclic hydrogenation and subsequent solution treatment (2/2)
   16. Application of nano-porous-Si and trenched electrode contacts for improving the performance of poly-Si solar cells
6. Applied mathematics
   1. Using continuous restricted Boltzmann machine to estimate the depth of sedation
   2. Using entropy encoding algorithm to a multilevel selection interface for BCI based spelling system (1/2)
   3. Using entropy encoding algorithm to a multilevel selection interface for BCI based spelling system (2/2)
   4. Performance analysis of an air standard Diesel cycle with Biodiesel/Diesel blends
   5. A special IR switch and Code-Maker Translator Input Device for individuals with severe disabilities
7. Ceramics and glass
   1. Effect of excess Bi2O3 content on the sintering and dielectric characteristics of 0.65 (K0.5Bi0.5TiO3)-0.35 BaTiO3 ceramic (1/2)
   2. Effect of excess Bi2O3 content on the sintering and dielectric characteristics of 0.65 (K0.5Bi0.5TiO3)-0.35 BaTiO3 ceramic (2/2)
   3. The photoluminescent properties of La3+ ion-doped YInGe2O7 self-activated phosphor (1/2)
   4. The photoluminescent properties of La3+ ion-doped YInGe2O7 self-activated phosphor (2/2)
8. Communication science & engineering
   1. A novel Memetic Algorithm for the design of vector quantizers (1/2)
   2. A novel Memetic Algorithm for the design of vector quantizers (2/2)
   3. Resource allocation for higher data rate with carrier aggregation in 4G-LTE (1/2)
   4. Resource allocation for higher data rate with carrier aggregation in 4G-LTE (2/2)
   5. Digital business more emergency communication system based on the FPGA design and implementation
   6. Study of the protection mechanisms on fiber transmission (1/2)
   7. Study of the protection mechanisms on fiber transmission (2/2)
   8. The simulation of Solidly Mounted Resonator and filter for frequency tuning using Mason model
   9. The investigation of Si and Zr diffusion behaviors during the reactive diffusion—a molecular dynamics study (1/2)
   10. The investigation of Si and Zr diffusion behaviors during the reactive diffusion—a molecular dynamics study (2/2)
   11. High quality nitride-based material grow on silicon substrate by metal organic vapor phase epitaxy
   12. Computational study of turbocharging an existing NA engine
9. Computer & information science
   1. Stock selection model based on Semi-supervised Graph regularised Non-negative Matrix Factorisation, Rough Set and Grey Theory (1/2)
   2. Stock selection model based on Semi-supervised Graph regularised Non-negative Matrix Factorisation, Rough Set and Grey Theory (2/2)
   3. Design and implementation of a sensor module using fiber optic power feeding for home network (1/2)
   4. Design and implementation of a sensor module using fiber optic power feeding for home network (2/2)
   5. Generating of visual aesthetic Fractal patterns
   6. Multifractal spectra of the textile pattern in quilts art design
10. Computer science & information technology
    1. Hand Motion Identification using Independent Component Analysis of data glove and multichannel surface EMG
    2. An improvement to Variable-Structure Multiple-Model algorithm for maneuvering target tracking (1/2)
    3. An improvement to Variable-Structure Multiple-Model algorithm for maneuvering target tracking (2/2)
    4. A study of genetic-based optimization of pairs-trading models (1/2)
    5. A study of genetic-based optimization of pairs-trading models (2/2)
    6. Assessment process improvement on corroded oil pipeline by integrating web-based database system and computer aided engineering (1/2)
    7. Assessment process improvement on corroded oil pipeline by integrating web-based database system and computer aided engineering (2/2)
    8. An investigation of the relationship between performance of physical fitness and swimming ability based on the artificial neural network
    9. The development of a key poses selector for use in 3D games
    10. User authentication of smart mobile devices and cloud storage services
    11. Unmanned vehicle system design with multi-sensors detection capabilities
    12. Construction of a situated-interactive learning environment for young children (1/2)
    13. Construction of a situated-interactive learning environment for young children (2/2)
    14. Deployment of the Hospital Information System in medical organizations (1/2)
    15. Deployment of the Hospital Information System in medical organizations (2/2)
    16. Using Decision Tree for the analysis of National Skills Competition participants and the personality for decisions
    17. Exploring users’ willingness to help the online community
    18. Auction strategies through bidding information (1/2)
    19. Auction strategies through bidding information (2/2)
    20. Design of a wireless physiological monitoring system by mesh ZigBee sensor network for hemodialysis
11. Cultural & creative research
    1. The need for effective cross-cultural communication in creative industries: Two case studies
    2. Social design and reflection from Hinoki Village (1/2)
    3. Social design and reflection from Hinoki Village (2/2)
    4. Xiluo town community building process and analysis of development of tourism (1/2)
    5. Xiluo town community building process and analysis of development of tourism (2/2)
    6. The development of Chinese commercial narrative comic in the digital era
    7. To view interdisciplinary integration of cultural and creative industries and the experiential marketing strategy from the point of feature exhibitions—taking the exhibition experience of The Delight of Chinese Character Festival as an example
    8. A study on the creation of animation in the first person point of view—taking the “Limitless Imagination for the Sea” of the Hongmao Harbour Cultural Park as example (1/2)
    9. A study on the creation of animation in the first person point of view—taking the “Limitless Imagination for the Sea” of the Hongmao Harbour Cultural Park as example (2/2)
    10. Design process analysis for lampas woven structures in textiles
    11. Innovative design studies on modular application of traditional Kwon-Glazed Porcelain pattern (1/2)
    12. Innovative design studies on modular application of traditional Kwon-Glazed Porcelain pattern (2/2)
    13. The innovative design of green technology products research (1/2)
    14. The innovative design of green technology products research (2/2)
    15. Creations in photography with embroidery: Taiwanese cultural values and designs
    16. Using Internet technology to raise awareness of the urban landscape skyline
    17. A study on the design of inspirational products—with “Fortune Chicken” as an example
    18. Revitalization of China Time-honored Brand in the era of digital media
    19. Form images of local visual iconography in the genius loci
    20. A study of uses and gratification of YouTube for university students (1/2)
    21. A study of uses and gratification of YouTube for university students (2/2)
    22. Research on art forms of cover layouts of thread-bound books
    23. Research on design ideation with Taiwan cultural themes
    24. A research on the shaping of the embroidered portraits in the Qing edition of The Romance of the Three Kingdoms (1/2)
    25. A research on the shaping of the embroidered portraits in the Qing edition of The Romance of the Three Kingdoms (2/2)
    26. A research on the manifestation relationship between the layouts of Chinese garden’s artificial hills and three distances of landscape painting—taking the example of Taiwan Banqiao Lin Family Garden (1/2)
    27. A research on the manifestation relationship between the layouts of Chinese garden’s artificial hills and three distances of landscape painting—taking the example of Taiwan Banqiao Lin Family Garden (2/2)
    28. Research on implementation of Hakka education by using Analytic Hierarchy Process
    29. Study on the visual image of the covers of Kaohsiung Pictorial (1/2)
    30. Study on the visual image of the covers of Kaohsiung Pictorial (2/2)
    31. The innovation of Chinese tea culture: From “refreshing the mind” to “tea and Chan are of one flavor”
    32. A research on the synergy between Buddhist Vijnana-Only Doctrine and hypnosis counseling
    33. Green skylight: An overview of the aesthetics and eco-friendliness of a courtyard (1/2)
    34. Green skylight: An overview of the aesthetics and eco-friendliness of a courtyard (2/2)
    35. The bonding of popular topics with grassroots economy in Taiwan: A case study using the Rubber Duck sensation (1/2)
    36. The bonding of popular topics with grassroots economy in Taiwan: A case study using the Rubber Duck sensation (2/2)
    37. The assessment of the impact of character modeling on design fixation in movement expression of character animation
    38. Value-added application for e-learning into Chanel’s on-line exhibition through internet technology
    39. The heritage and innovation of the graceful cheongsam culture: A case study of Taiwanese designer labels (1/2)
    40. The heritage and innovation of the graceful cheongsam culture: A case study of Taiwanese designer labels (2/2)
    41. Innovation and environmental protection in Taiwan’s “vegetarian diet culture”—survey targeting religious groups
    42. A study of the combination of traditional craft and modern design in bamboo furniture (1/2)
    43. A study of the combination of traditional craft and modern design in bamboo furniture (2/2)
    44. Using traditional materials to revitalizing East Timor’s cultural industries (1/2)
    45. Using traditional materials to revitalizing East Timor’s cultural industries (2/2)
    46. Golden puppet shows elegance reproduction in the digital era
    47. The era of miniature cultural and creative industry: Integrating style shaping with business pattern into brand construction (1/2)
    48. The era of miniature cultural and creative industry: Integrating style shaping with business pattern into brand construction (2/2)
    49. Integrating service-oriented design for innovative course model construction (1/2)
    50. Integrating service-oriented design for innovative course model construction (2/2)
    51. Implanting the value of service design into the development of religious cultural and creative merchandise (1/2)
    52. Implanting the value of service design into the development of religious cultural and creative merchandise (2/2)
    53. Add brand value to traditional enterprises through design using the package design of pickled products at Miaoli area as an example
    54. Breaking through the ontological confines of biological materialism in cognitive science (1/2)
    55. Breaking through the ontological confines of biological materialism in cognitive science (2/2)
    56. The possibility of cultural proximity between Taiwan, Singapore and Japan in Kawaii culture
    57. An exploration of documentary film recommender systems (1/2)
    58. An exploration of documentary film recommender systems (2/2)
    59. From industrial heritage regeneration to regional revitalization—a case study of Checheng Timber Industry Museum Park in Taiwan (1/2)
    60. From industrial heritage regeneration to regional revitalization—a case study of Checheng Timber Industry Museum Park in Taiwan (2/2)
12. Design theory & knowledge innovation
    1. A framework of teaching preparation and planning to arouse children’s creativity through the colour-based story editing approach (1/2)
    2. A framework of teaching preparation and planning to arouse children’s creativity through the colour-based story editing approach (2/2)
    3. Ontological analysis on the 3D animation techniques from a perspective of “Art Automata”—exemplified by a reference to traditional Quanzhou marionette performances (1/2)
    4. Ontological analysis on the 3D animation techniques from a perspective of “Art Automata”—exemplified by a reference to traditional Quanzhou marionette performances (2/2)
    5. Design and development strategy of lightweight product packaging in green life cycle (1/2)
    6. Design and development strategy of lightweight product packaging in green life cycle (2/2)
    7. Visual metaphor in poster design (1/2)
    8. Visual metaphor in poster design (2/2)
    9. Exploring service quality of social networking sites based on Kano model and innovation diffusion theory
    10. Consumer-preferred pattern search approach for the design of Taiwan Tea package form
    11. Developing a Kano-based evaluation model for innovation design (1/2)
    12. Developing a Kano-based evaluation model for innovation design (2/2)
    13. Applying multimedia for combining harp music and photography design, with John Thomas’ Autumn as an example (1/2)
    14. Applying multimedia for combining harp music and photography design, with John Thomas’ Autumn as an example (2/2)
    15. A study on the usability of a jeweller’s workbench (1/2)
    16. A study on the usability of a jeweller’s workbench (2/2)
    17. An innovative light electric vehicle for caring shipping on logistic Transnet (1/2)
    18. An innovative light electric vehicle for caring shipping on logistic Transnet (2/2)
    19. Product design using Kansei-based creative associative thinking (1/2)
    20. Product design using Kansei-based creative associative thinking (2/2)
    21. Study on attractive factors of electronic products by environmental materials: Using notebook computers as example (1/2)
    22. Study on attractive factors of electronic products by environmental materials: Using notebook computers as example (2/2)
    23. A primary exploration of assistive devices’ design by using QFD—the electric stander for CP children as example (1/2)
    24. A primary exploration of assistive devices’ design by using QFD—the electric stander for CP children as example (2/2)
    25. Analyzing needs and emotional preference factors of mobility aids for seniors (1/2)
    26. Analyzing needs and emotional preference factors of mobility aids for seniors (2/2)
    27. Discussion on industrial design of cultural creative industrial pattern
    28. Study on the interactive design of brand user experience for digital media environment (1/2)
    29. Study on the interactive design of brand user experience for digital media environment (2/2)
    30. Mechanical efficiency of a planetary-gear-train type automatic transmission
    31. Generate artistic fractal patterns based on complex system and Julia set
    32. Fractal characteristics of quilt patterns
13. Digital content & digital technology
    1. Interactivity: Media convergence and digital media (1/2)
    2. Interactivity: Media convergence and digital media (2/2)
    3. The ambition of the consumer on the mobile game: Tower of Saviors (1/2)
    4. The ambition of the consumer on the mobile game: Tower of Saviors (2/2)
    5. The impact of applying interactive multimedia materials to English teaching practices on children’s learning of English—the case of K.C. English (1/2)
    6. The impact of applying interactive multimedia materials to English teaching practices on children’s learning of English—the case of K.C. English (2/2)
    7. A study on the effects of subliminal stimulus messages in application of the image and sound mask effect mixing method
    8. A communicational application to enhance the design process: Concept of Web-Based Communication Service for interior design
    9. Using fractal dimension to analyse the plane formation for the lacquer painting
    10. Automatic segmentation of motion capture data of Quan-zhou chest-clapping dance (1/2)
    11. Automatic segmentation of motion capture data of Quan-zhou chest-clapping dance (2/2)
14. Electrical & electronic engineering
    1. Design and implementation of a multi-axis motion controller using SoPC technology (1/2)
    2. Design and implementation of a multi-axis motion controller using SoPC technology (2/2)
    3. Novel non-direct signal detect probing and modeling developed by the Biot-Savart theorem
    4. Sensorless sliding-mode control of Permanent Magnet Synchronous Motor based on high frequency injection method (1/2)
    5. Sensorless sliding-mode control of Permanent Magnet Synchronous Motor based on high frequency injection method (2/2)
    6. The fast algorithm of short-term unit commitment (1/2)
    7. The fast algorithm of short-term unit commitment (2/2)
    8. IoT real-world monitoring the household electric power (1/2)
    9. IoT real-world monitoring the household electric power (2/2)
    10. A novel Hybrid Particle Swarm Optimization for optimal power dispatch problem (1/2)
    11. A novel Hybrid Particle Swarm Optimization for optimal power dispatch problem (2/2)
    12. Design and implementation of an advanced LED headlight with Adaptive Front-lighting System
    13. Study of magnetic properties on magnetic nanostructure array with different pore diameter on Anodic Alumina Oxide template
    14. Design and implementation of an Extra-High Step-Up Converter for PV power system (1/2)
    15. Design and implementation of an Extra-High Step-Up Converter for PV power system (2/2)
15. Engineering materials & industrial applications
    1. Golf accessory designs for young female adults with Kansei Form Composition approach (1/2)
    2. Golf accessory designs for young female adults with Kansei Form Composition approach (2/2)
16. Green technology & architecture engineering
    1. The study of BOP group’s lifestyle and Sustainable Consumption Behavior design (1/2)
    2. The study of BOP group’s lifestyle and Sustainable Consumption Behavior design (2/2)
    3. Green management: A case study of HYA cable television’s account management process improvement (1/2)
    4. Green management: A case study of HYA cable television’s account management process improvement (2/2)
    5. Design of an advanced retractable multi-speaker headphone (1/2)
    6. Design of an advanced retractable multi-speaker headphone (2/2)
    7. Production of nano structured stainless steel surface through the Electrolytic Plasma Technology (1/2)
    8. Production of nano structured stainless steel surface through the Electrolytic Plasma Technology (2/2)
    9. Process control parameters of nano structured stainless steel surface through the plasma electrolytic technology
    10. A novel home-ventilation soundproof structure design based on nature-landscape model (1/2)
    11. A novel home-ventilation soundproof structure design based on nature-landscape model (2/2)
    12. Growth Fe2O3 films on stainless steel for solar absorbers
    13. Study on the influence of electrolyte concentration on the Dye-Sensitized Solar Cells performance and long-term stability using Taguchi method
17. Green technology material
    1. Structure and dielectric properties of lower valence compensation for Ba1-xNax(FeTa)0.5O3 by reaction sintering process (1/2)
    2. Structure and dielectric properties of lower valence compensation for Ba1-xNax(FeTa)0.5O3 by reaction sintering process (2/2)
    3. A Low Dropout Regulator with low power consumption (1/2)
    4. A Low Dropout Regulator with low power consumption (2/2)
18. Industrial design & design theory
    1. Study on children’s web page preferences through participatory design
    2. Ejector nozzle design by numerical simulation for the ejector type air-conditioner system (1/2)
    3. Ejector nozzle design by numerical simulation for the ejector type air-conditioner system (2/2)
    4. Design of drink Vending Machines with computationally improved refunding system based on Petri Nets
    5. Application of Delphi method in constructing evaluation indicators of design students’ core competencies
19. Innovation design & creative design
    1. Study on mascot design strategy of brands of happiness (1/2)
    2. Study on mascot design strategy of brands of happiness (2/2)
    3. US: A system to meet love by chance located in metro-bus transfer service (1/2)
    4. US: A system to meet love by chance located in metro-bus transfer service (2/2)
    5. Application of extensive QFD innovative procedure on railing design (1/2)
    6. Application of extensive QFD innovative procedure on railing design (2/2)
20. Internet technology
    1. A load balanced and fault tolerant cluster management system from the aspect of house geomancy evaluation (1/2)
    2. A load balanced and fault tolerant cluster management system from the aspect of house geomancy evaluation (2/2)
21. Management science
    1. A system dynamics investigation for the development and management of Chinese orchestra in elementary schools
    2. The impact of green accounting on product design and development
22. Materials for sustainable society
    1. A study on a refurbishment model for existing North Paiwan slabstone of slabstone houses (1/2)
    2. A study on a refurbishment model for existing North Paiwan slabstone of slabstone houses (2/2)
    3. Material innovation and application of vertical garden system in Taiwan (1/2)
    4. Material innovation and application of vertical garden system in Taiwan (2/2)
23. Mechanical & automation engineering
    1. Analysis and experiment of performance of a fan-sink assembly (1/2)
    2. Analysis and experiment of performance of a fan-sink assembly (2/2)
    3. Enhancement of selective siphon control method for deadlock prevention in FMSs (1/2)
    4. Enhancement of selective siphon control method for deadlock prevention in FMSs (2/2)
    5. PSO optimization Fuzzy-PID controllers applied to a Tri-rotor UAV (1/2)
    6. PSO optimization Fuzzy-PID controllers applied to a Tri-rotor UAV (2/2)
    7. Dynamic simulation and application of virtual reality using dual axis device to remote control (1/2)
    8. Dynamic simulation and application of virtual reality using dual axis device to remote control (2/2)
24. Media design & technologists
    1. Analysis of the characteristics of digital image based on color
    2. Editing analysis on emotional expression of film
    3. Changer—a project of contemporary image and body based on theory mirror stage (1/2)
    4. Changer—a project of contemporary image and body based on theory mirror stage (2/2)
25. Nanomaterials application
    1. Effect of low-heating-rate vacuum annealing on aluminum doped zinc oxide films
    2. Mg doping effect on the microstructural and optical properties of ZnO nanocrystalline films
26. Other
    1. Discussion for fuzziness on design of Chinese traditional farm tools (1/2)
    2. Discussion for fuzziness on design of Chinese traditional farm tools (2/2)
    3. Design of medical infanette based on service design idea (1/2)
    4. Design of medical infanette based on service design idea (2/2)
    5. Research on digital technology promoting the development of China’s sculpture industry
    6. Rethinking atmosphere on a new trend of library spatial design under changing users’ activities: Using the new library space of Yangtze University as case study
    7. Library collection structure improvement based on statistic analysis of borrowing—taking Fuzhou University Academy of Arts & Craft Library as an example (1/2)
    8. Library collection structure improvement based on statistic analysis of borrowing—taking Fuzhou University Academy of Arts & Craft Library as an example (2/2)
    9. Memory and electrical properties of (100)-oriented aluminum nitride thin films prepared by radio frequency magnetron sputtering (1/2)
    10. Memory and electrical properties of (100)-oriented aluminum nitride thin films prepared by radio frequency magnetron sputtering (2/2)
    11. The study of evaluation of family-group visitors of interactive exhibit patterns in science museums (1/2)
    12. The study of evaluation of family-group visitors of interactive exhibit patterns in science museums (2/2)
    13. Children’s cognition of dangerous objects which cause fire (1/2)
    14. Children’s cognition of dangerous objects which cause fire (2/2)
    15. The influence of visual programming learning on logical thinking and reasoning ability for the sixth grade students in elementary school (1/2)
    16. The influence of visual programming learning on logical thinking and reasoning ability for the sixth grade students in elementary school (2/2)
    17. Quantitative research on hairdressing curriculum and workplace competencies of technical and vocational education
    18. Exploring parents’ experience and attitude toward their children in pain (1/2)
    19. Exploring parents’ experience and attitude toward their children in pain (2/2)
    20. Multiple interpretation of print technology artifact collection and exhibition
    21. The effect of learning chaos concept for high school students by attending IYPT
    22. A study on the application of big data analytics in design
    23. AI techniques and its application in game programming
27. Thin film & device process
    1. Properties of hydrogen plasma treated Gallium and Aluminum co-doped Zinc Oxide films
    2. Growth characteristics and transparent properties of Al-Si-O films prepared by E-beam evaporation on PET substrate at room temperature
    3. Optical characteristics and microstructures of large-field-angle P-polarizer deposited by E-beam system (1/2)
    4. Optical characteristics and microstructures of large-field-angle P-polarizer deposited by E-beam system (2/2)