
171
Peak-to-average Power ratio imPlementation
complex format, which should be divided by a phase sequence, which
is also in a complex format. e design of this complex division is
explained in the next section.
e IP of the OPS-DSI scheme is shown in Figure5.15, which
is generated by ISE tools. e information regarding pin charac-
teristics are presented in Table5.13. According to Figure5.15, the
pins of the IP can be recognized. As explained in Table5.13, the
pins of Inpgateway1, Inpgateway2, Inpgateway3, and Inpgateway4
are real and imaginary parts of input signal and phase sequence,
respectively.
It is shown in Figure 5.15 that the pins ...