This chapter describes how to add the host mappings for the host profiles that are created through Cisco UCS Manager to the Storwize V7000 storage system, connect to the boot LUNs, and perform the initial ESXi installation. The WWPNs for the hosts are to complete the steps in this chapter.
9.1 Adding hosts and mapping the boot volumes on the Storwize V7000 system
To add hosts and map the boot volumes on the Storwize V7000 storage system, complete the following steps:
1. Open the Storwize V7000 management GUI by navigating to <<var_cluster_mgmt_ip>> ...