Section 2: IP IGP Protocols (16 Points)
Configure the IP routing as in Figure 3-13 as directed.
Section 2.1: EIGRP (7 Points)
Configure EIGRP AS1 as shown in Figure 3-13. Initial loopback interfaces should be advertised within EIGRP for every router running EIGRP.
You should configure EIGRP AS1 on R1-R2-R3. You could just enable EIGRP with a network 10.0.0.0 statement everywhere. But as you can see in Figure 3-13, R1 does not have all its network 10 interfaces included in EIGRP. You will need to configure an inverse mask for the networks you require advertised and included in EIGRP on R1; preferably, configure R2 and R3 in the same manner although you will not loose marks for this in this case. Do not forget to disable auto summarization on all ...
Get CCIE Routing and Switching Practice Labs now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.
