Section 4: EGP Protocols (24 Points)
Configure BGP as shown in Figure 3-14 with the following peering:
R2 172.16.0.1 – R3 172.16.0.2
R2 172.16.0.1 – R1 10.80.80.1
R1 10.80.80.1 – R8 10.8.8.8
R1 10.80.80.1 – R6 10.6.6.6
R6 10.6.6.6 – R4 10.4.4.4
R6 10.6.6.6 – R5 10.5.5.5
R6 10.6.6.6 – R7 10.7.7.7
Where possible, minimize the configuration required.
You are required to configure the peering between the BGP autonomous systems as described; pay particular attention to the update source of each router. You should ensure that no synchronization is configured on all IBGP routers R1, R2, R3, R5, R6, R7, and R8 because BGP will not be fully synchronized with the underlying IGP.
The next question prompts you to redistribute your connected loopback interfaces so ...
Get CCIE Routing and Switching Practice Labs now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.
