Section 5.0: IPSec Configuration

5.1. IPSec LAN-to-LAN Router-to-Router

  1. Configure a LAN-to-LAN tunnel between R5 and R6 for Loopback5 networks, as demonstrated in the following example:

     ! <snip from R5 config> hostname R5 ! crypto isakmp policy 10 authentication pre-share crypto isakmp key cisco address ! ! crypto ipsec transform-set lab5 esp-des ! ! ! crypto map lab5 10 ipsec-isakmp set peer set transform-set lab5 match address 101 ! interface Loopback5 ip address ! ! interface Serial1/0 ip address crypto map lab5 ! ip route Serial1/0 ! access-list 101 permit icmp ! <snip from R6 config> hostname ...

Get CCIE Security Practice Labs now with the O’Reilly learning platform.

O’Reilly members experience live online training, plus books, videos, and digital content from nearly 200 publishers.