Section 2.0: Routing Configuration

2.1. OSPF

  1. Configure OSPF as shown in Figure 7-3.

  2. Do not change the default network type on the Frame Relay network.

  3. Configure Unicast OSPF on R2, R3, and R4 using the neighbor command, as the Frame Relay network by default is NON-BROADCAST:

    r2#show ip ospf interface
Serial0 is up, line protocol is up
  Internet Address 179.7.2.2/29, Area 0
  Process ID 110, Router ID 2.2.2.2, Network Type NON_BROADCAST, Cost: 64 Transmit Delay is 1 sec, State DROTHER, Priority 1 Designated Router (ID) 3.3.3.3, Interface address 179.7.2.3 Backup Designated router (ID) 4.4.4.4, Interface address 179.7.2.4 Timer intervals configured, Hello 30, Dead 120, Wait 120, Retransmit 5 Hello due in 00:00:01 Index 1/1, flood queue length 0 Next ...

Get CCIE Security Practice Labs now with the O’Reilly learning platform.

O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.

Start your free trial