Chapter 6's Review Questions
| 1: | On the 1900, portfast is enabled on the 10-Mbps ports and disabled on the uplink ports. Can you change this? If so, how? Give a practical example of using portfast. |
| A1: | Answer: Portfast is enabled by default on the 10-Mbps ports in the assumption that they are host ports on the 1900. It is not enabled on the 100-Mbps uplink ports (ports A and B) assuming they connect to another switch or server. The commands on the 1900 are as follows: menu, p for port, select a port, and then h for portfast mode. Refer back to Table 6-7 for portfast commands on other devices. All host ports should be enabled for portfast. Specific examples include a host that can't find a domain controller or a DHCP server or a Novell client who ... |
Get CCNP Practical Studies: Troubleshooting now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.
