Open-cell foam (reticulated) was used for this project; however closed-cell foam (L 200) could also be used.
Figure 21-1: Begin with a rectangle roughly 18 inches by 10 inches.
Figure 21-2: Make a tube by gluing the two short sides together.
Figure 21-3: Divide the top of the cylinder into four sections by adding marks. Between the marks at the top of the cylinder, measure down 4–5 inches and ...
Get Foam Patterning and Construction Techniques now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.
