196 Implementing the IBM Storwize V5000
2. Click Start Administrative Tools MPIO, click the Discover Multi-Paths tab, and
select Add support for iSCSI devices, as shown in Figure 5-50.
Figure 5-50 Enable iSCSI MPIO
3. Click Add and confirm the prompt to reboot your host.
Important: In some cases, the Add support for iSCSI devices option is disabled. To enable
this option, you must already have a connection to at least one iSCSI device.
Chapter 5. I/O Group basic volume configuration 197
4. After the reboot process is complete, log on again and click Start Administrative
Tools iSCSI Initiator to open the iSCSI Configuration tab. Browse to the Discovery tab,
as shown in Figure 5-51.
Figure 5-51 iSCSI Properties Discovery tab
198 Implementing the IBM Storwize V5000
5. Click Discover Portal..., enter the IP address of another IBM Storwize V5000 iSCSI port
(as shown in Figure 5-52), and click OK.
Figure 5-52 Discover Target Portal window
Chapter 5. I/O Group basic volume configuration 199
6. Return to the Targets tab (as shown in Figure 5-53) and you see that the new connection
there is listed as Inactive.
Figure 5-53 Inactive target ports
200 Implementing the IBM Storwize V5000
7. Highlight the inactive port and click Connect. The Connect to Target window opens, as
shown in Figure 5-54.
Figure 5-54 Connect to a target

Get Implementing the IBM Storwize V5000 now with the O’Reilly learning platform.

O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.