Radio Receiver Technology: Principles, Architectures and Applications

Chapter I

Functional Principle of Radio Receivers

I.1 Some History to Start

Around 1888 the physicist Heinrich Hertz experimentally verified the existence of electromagnetic waves and Maxwell's theory. At the time his transmitting system consisted of a spark oscillator serving as a high frequency generator to feed a dipole of metal plates. Hertz could recognize the energy emitted by the dipole in the form of sparks across a short spark gap connected to a circular receiving resonator that was located at some distance. However, this rather simple receiver system could not be used commercially.

I.1.1 Resonance Receivers, Fritters, Coherers, and Square-Law Detectors (Detector Receivers)

The road to commercial applications opened only after the Frenchman Branly was able to detect the received high-frequency signal by means of a coherer, also known as a fritter. His coherer consisted of a tube filled with iron filings and connected to two electrodes. The transfer resistance of this setup decreased with incoming high-frequency pulses, producing a crackling sound in the earphones. When this occurred the iron filings were rearranged in a low-resistance pattern and thus insensitive to further stimulation. To keep them active and maintain high resistance they needed to be subjected to a shaking movement. This mechanical shaking could be produced by a device called a Wagner hammer or knocker. A receiving system comprising of a dipole antenna, a coherer as a detector, a Wagner hammer with direct ...