March 2017
Beginner to intermediate
422 pages
8h 4m
English
We used the GPIO pins for the serial port to contact the Raspberry Pi from a desktop computer in an earlier chapter. Physical pins 8 and 10 (BCM GPIO 14 and 15) for transmit (TX) and receive (RX), respectively, can also be used to talk from your Raspberry Pi Zero out to other devices. Let's explore the Universal Asynchronous Receiver/Transmitter (UART) a bit further.
For this recipe, all you'll need is your Raspberry Pi Zero and a jumper wire to connect your TX and RX pins.
This is about as simple a setup you can have, but it is a typical way to verify you've set up your Raspberry Pi Zero to communicate outbound over serial. By ...
Read now
Unlock full access