The Hands-on XBEE Lab Manual

Experiment 20

Digital and Analog Measurements in a Network

Requirements

2 or 3 XBee modules

1 or 2 XBee adapter boards

2 Solderless breadboards

1 USB-to-XBee adapter

1 USB cable—type-A to mini-B

1 Microcontroller with a serial port (Arduino Uno or ARM mbed)

1 5-V-to-3.3-V logic-conversion circuit or module (Arduino Uno only)

1 3.3-V-to-5-V logic-conversion circuit or module (Arduino Uno only)

1 10-kohm potentiometer

1 10-kohm, 1/4 watt, 10% resistor (brown-black-orange)

1 4700-ohm, 1/4 watt, 10% resistor (yellow-violet-red)

1 1000-ohm, 1/4 watt, 10% resistor (brown-black-red)

3 330-ohm, 1/4 watt, 10% resistors (orange-orange-brown)

3 LEDs

Terminal-emulation software such as HyperTerminal for Windows (ARM mbed only)

Digi X-CTU software running ...