Errata

Errata for Arista Warrior

Submit your own errata for this product.

The errata list is a list of errors and their corrections that were found after the product was released. If the error was corrected in a later version or reprint the date of the correction will be displayed in the column titled "Date Corrected".

The following errata were submitted by our customers and approved as valid errors by the author or editor.

Color key: Serious technical mistake Minor technical mistake Language or formatting error Typo Question Note Update

Version	Location	Description	Submitted By	Date submitted	Date corrected
Printed	Page 234 2nd paragraph, right after figure 18-3	There is a typo in the command to show the MLAG ISSU compatibility: it says "show malg issu compatibility", show be "show mlag" Note from the Author or Editor: Thanks!	Alejandro Schwoykoski	Sep 22, 2019
Printed	Page 279 Last paragraph (with scorpion)	The description in this paragraph is incorrect and can be removed. The following topology is a 'simtop' topo. in350(Et3/27/1))--(Et1)rtr101 host1(eth0)--(Et2)rtr101 dut:rtr101 interface Et1 switchport mode trunk interface Et2 switchport mode trunk dut:host1 ifconfig eth0 10.10.1.3/24 route add default gw 10.10.1.10 eth0 dut:in350 ip routi ip virtual-router mac-address 00:01:02:03:04:05 int et 3/27/1 no switch ip ad 10.10.1.1/24 ip virtual-router address 10.10.1.10 //src @pcarson-eos-trunk0916-0.sjc% Art attach host1 @host1% ping 10.10.1.10 PING 10.10.1.10 (10.10.1.10) 56(84) bytes of data. 64 bytes from 10.10.1.10: icmp_seq=1 ttl=64 time=50.0 ms 64 bytes from 10.10.1.10: icmp_seq=2 ttl=64 time=4.93 ms 64 bytes from 10.10.1.10: icmp_seq=3 ttl=64 time=5.49 ms 64 bytes from 10.10.1.10: icmp_seq=4 ttl=64 time=5.46 ms 64 bytes from 10.10.1.10: icmp_seq=5 ttl=64 time=5.25 ms 64 bytes from 10.10.1.10: icmp_seq=6 ttl=64 time=5.04 ms Note from the Author or Editor: Thanks.	Peter Carson	Sep 17, 2019