Engineering Design Graphics: Sketching, Modeling, and Visualization, 2nd Edition

Table of contents

1. Cover Page
2. Title Page
3. Copyright
4. Dedication
5. Contents
6. PREFACE
7. CHAPTER 1: ENGINEERING DESIGN
   1. INTRODUCTION
   2. ASPECTS OF ENGINEERING DESIGN
   3. ANALYSIS AND DESIGN
   4. PRODUCT ANATOMY
   5. DESIGN PHASES
   6. DESIGN PROCESS OVERVIEW
   7. NEEDS ASSESSMENT
   8. PROBLEM DEFINITION
   9. BACKGROUND RESEARCH
   10. DESIGN CRITERIA
   11. DESIGN CONSTRAINTS
   12. ALTERNATIVE SOLUTIONS
   13. ANALYSIS
   14. EVALUATION AND SELECTION
   15. SPECIFICATION
   16. COMMUNICATION
   17. CONCURRENT ENGINEERING
   18. TEAMWORK
   19. QUESTIONS
8. CHAPTER 2: FREEHAND SKETCHING
   1. INTRODUCTION
   2. SKETCHING TOOLS AND MATERIALS
   3. SKETCHING TECHNIQUES
   4. PROPORTIONING
   5. INSTRUMENT USAGE-TRIANGLES
   6. LINE STYLES
   7. QUESTIONS
9. CHAPTER 3: PLANAR PROJECTIONS AND PICTORIAL VIEWS
   1. PLANAR PROJECTIONS
   2. OBLIQUE PROJECTIONS
   3. ORTHOGRAPHIC PROJECTIONS
   4. AXONOMETRIC PROJECTIONS
   5. ISOMETRIC PROJECTIONS
   6. INTRODUCTION TO PICTORIAL SKETCHING
   7. OBLIQUE SKETCHES
   8. ISOMETRIC SKETCHES
   9. QUESTIONS
10. CHAPTER 4: MULTIVIEWS
    1. MULTIVIEW SKETCHING
    2. VISUALIZATION TECHNIQUES FOR MULTIVIEW DRAWINGS
    3. QUESTIONS
11. CHAPTER 5: AUXILIARY AND SECTION VIEWS
    1. AUXILIARY VIEWS
    2. SECTION VIEWS
    3. QUESTIONS
12. CHAPTER 6: DIMENSIONING AND TOLERANCING
    1. DIMENSIONING
    2. TOLERANCING
    3. QUESTIONS
13. CHAPTER 7: COMPUTER-AIDED PRODUCT DESIGN SOFTWARE
    1. INTRODUCTION
    2. PARAMETRIC MODELING SOFTWARE
    3. NURBS SURFACE MODELING
    4. QUESTIONS
14. CHAPTER 8: WORKING DRAWINGS
    1. INTRODUCTION
    2. THE IMPACT OF TECHNOLOGY ON WORKING DRAWINGS
    3. DETAIL DRAWINGS
    4. ASSEMBLY DRAWING VIEWS
    5. BILL OF MATERIALS AND BALLOONS
    6. SHEET SIZES
    7. TITLE BLOCKS
    8. BORDERS AND ZONES
    9. REVISION BLOCKS
    10. DRAWING SCALE
    11. TOLERANCE NOTES
    12. STANDARD PARTS
    13. WORKING DRAWING CREATION USING PARAMETRIC MODELING SOFTWARE
    14. QUESTIONS
15. CHAPTER 9: REVERSE ENGINEERING TOOLS
    1. INTRODUCTION
    2. 3D SCANNING
    3. RAPID PROTOTYPING
    4. QUESTIONS
16. CHAPTER 10: DIGITAL SIMULATION TOOLS
    1. UPFRONT ANALYSIS
    2. FINITE ELEMENT ANALYSIS
    3. DYNAMICS SIMULATION SOFTWARE
    4. QUESTIONS
17. CHAPTER 11: CONCEPT DESIGN TOOLS
    1. INNOVATION
    2. TOOLS FOR DESIGN INNOVATION
    3. INDUSTRIAL DESIGN
    4. CONCEPT DESIGN AND INNOVATION
    5. CONCEPT DESIGN SOFTWARE TOOLS
    6. QUESTIONS
18. CHAPTER 12: PRODUCT DISSECTION
    1. INTRODUCTION
    2. PRODUCT SUITABILITY
    3. PRODUCT DISSECTION PROCEDURE
    4. PRE-DISSECTION ANALYSIS
    5. DISSECTION
    6. PRODUCT DOCUMENTATION
    7. PRODUCT ANALYSIS
    8. PRODUCT IMPROVEMENT
    9. REASSEMBLY
    10. COMMUNICATION
    11. QUESTIONS
19. CHAPTER 13: PERSPECTIVE PROJECTIONS AND PERSPECTIVE SKETCHES
    1. PERSPECTIVE PROJECTION
    2. PERSPECTIVE SKETCHES
    3. QUESTIONS
20. APPENDIX A: ANSI PREFERRED ENGLISH LIMITS AND FITS
21. APPENDIX B: ANSI PREFERRED METRIC LIMITS AND FITS
22. INDEX