book

OSA-Express Implementation Guide

by Mike Ebbers, Wonjin Chung, Dody Kurniadi, Joselito Manoto

June 2014

Intermediate to advanced

292 pages

English

IBM Redbooks

Read now

Unlock full access

Trademarks
AuthorsNow you can become a published author, tooComments welcome
1.1 Introduction to the Open Systems Adapter1.1.1 Operating modes1.2 OSA-Express for ensemble connectivity1.2.1 Intraensemble data network (IEDN)1.2.2 Intranode management network (INMN)
2.1 Software support2.2 Hardware and software definitions for the OSA2.2.1 Modes of operation and addressing support2.3 OSA Support Facility (OSA/SF) requirements2.4 Quick Start tables2.4.1 OSA function support2.4.2 Quick Start tables for IBM z/OS and z/VM operating systems2.5 Policy-based networking
3.1 Configuration chart3.2 Hardware Configuration Definition3.2.1 Channel path definition3.2.2 Control unit definition3.2.3 Device definition3.2.4 Generating the IOCDS input from the HCD3.2.5 Dynamic reconfiguration
4.1 QDIO environment4.2 Hardware Configuration Definition4.3 Missing-interrupt handler for QDIO4.4 Customizing the z/OS network environment4.4.1 Defining OSA devices to the z/OS Communications Server for QDIO4.4.2 TCP/IP definitions4.5 Activation4.5.1 Verifying that devices are online4.5.2 VTAM activation4.5.3 TCP/IP devices4.6 Relevant status displays4.7 Systems Network Architecture support for QDIO mode

5.1 QDIO environment5.2 Hardware Configuration Definition5.3 Missing-interrupt handler for QDIO5.4 Customizing the z/VM network environment5.4.1 TCP/IP definitions5.5 Activation5.5.1 Verify that devices are online5.5.2 Activate the TCP/IP devices5.6 Relevant status displays
6.1 Configuration information6.2 Hardware definitions6.3 Creating and activating the OSA configuration6.4 Customizing the z/OS network environment6.4.1 VTAM definitions6.4.2 TCP/IP definitions6.5 Activating the connections6.5.1 Verifying that devices are online6.5.2 VTAM activation6.5.3 TCP/IP activation6.6 Relevant status displays
7.1 Configuration information7.2 Hardware definitions7.3 OSA configuration and OAT definitions7.4 Network definitions7.4.1 VTAM definitions7.4.2 TCP/IP definitions7.5 Activating the connections7.5.1 Verifying that devices are online7.5.2 VTAM activation7.5.3 TCP/IP activation7.6 Relevant status displays
8.1 QDIO compared to non-QDIO in z/VSE8.1.1 TCP/IP stacks in z/VSE8.1.2 TCP/IP setup with OSA CHPID in QDIO mode8.1.3 TCP/IP setup with OSA CHPID in non-QDIO mode8.2 Related publications
9.1 Virtual MAC overview9.1.1 Virtual MAC concept9.1.2 Virtual MAC address assignment9.2 Virtual MAC implementation9.2.1 Verification
10.1 VLAN overview10.1.1 Types of connections10.1.2 VLAN tagging basics10.2 General VLAN design considerations10.2.1 VLAN configuration example10.2.2 Sharing an OSA port with the same VLAN ID10.2.3 Primary and secondary router support with VLANs10.2.4 Operating system support10.3 VLAN support for the IBM z/OS operating system10.3.1 VLAN implementation10.3.2 Configuring OSA with VLAN ID10.3.3 Verification10.4 VLAN support in the IBM z/VM operating system10.4.1 z/VM native VLAN support10.4.2 Verification10.5 VLAN support for the z/VSE operating system10.6 VLAN support for the Linux operating system10.6.1 VLAN implementation10.6.2 Verification
11.1 Virtual switch description11.1.1 VSWITCH controller11.1.2 Network interface card11.1.3 VSWITCH capabilities11.2 Our VSWITCH environment11.3 Configuring a Layer 2 VSWITCH11.3.1 Define the virtual switch environment11.3.2 Authorize the guest system access to the virtual switch11.3.3 Connect the guest systems to the VSWITCH11.3.4 Verify the virtual switch configuration11.3.5 Creating definitions for Layer 2 support: SUSE and Red Hat Linux11.3.6 Setting up Layer 2 for the guest systems11.3.7 Making permanent device and network definitions11.4 Configuring VLAN support11.4.1 Define VLAN capabilities to the virtual switch11.4.2 Authorize Linux guests access to the virtual switch with VLAN IDs11.4.3 Add VLANs to the guest systems11.4.4 Add VLAN support to the z/OS TCP/IP stacks11.4.5 Configure trunk mode in the Ethernet switch for the OSA connections11.4.6 Verify the VLAN11.5 Enabling port isolation11.5.1 Port isolation off, systems sharing VSWITCH and OSA11.5.2 Port isolation on, systems sharing VSWITCH and OSA11.6 VEPA mode11.6.1 Promiscuous mode11.6.2 Link aggregation
OSA-Express feature descriptions by version
Setting up the Network Traffic AnalyzerUsing the Network Traffic Analyzer featureNetwork Management Interface API for diagnosing problemsReferences
HMC advanced facilities for OSAView code levelConfiguring OSA channels on/off
IBM z/OS commandsz/VM commandsDefining and coupling a NIC using CP commandsLinux on System z TCP/IP commands
Setup requirements and overviewSetting up OSA/SF in the z/OS environmentInstalling OSA/SF GUI on a workstationUsing the OSA/SF GUI
Creating the OSA configurationCreating the OAT fileActivating the OSA configuration
Default modeHardware configuration definition requirementsDisplaying the default OATCustomizing z/OS TCP/IPActivation
Sample environmentz/OS definitionsz/VM TCP/IP profile
ARP takeover descriptionARP takeover definitionsVerifying ARP takeover
RMF for the Open Systems AdapterRMF Monitor II output
z/VM virtual switch authorization
IBM RedbooksOther publicationsOnline resourcesHow to get IBM RedbooksHelp from IBM
IntroductionBusiness problem and business valueReference architecture useRequirementsInfoSphere BigInsights predefined configurationInfoSphere BigInsights HBase predefined configurationDeployment considerationsCustomizing the predefined configurationsPredefined configuration bill of materialsReferencesThe team who wrote this paperNow you can become a published author, too!Stay connected to IBM Redbooks
Trademarks

Content preview from OSA-Express Implementation Guide

QDIO mode for the IBM z/OS operating system

This chapter covers the implementation steps to establish IBM z/OS network connectivity with an IBM Open Systems Adapter (OSA) channel path identifier (CHPID), using Queued Direct I/O (QDIO) mode.

Although the Open Systems Adapter Support Facility (OSA/SF) is not required because all definitions are set dynamically, use OSA/SF for monitoring and controlling the OSA port.

For more information about installing and using OSA/SF, see Appendix E, “Using the Open Systems Adapter Support Facility” on page 191 ...

Become an O’Reilly member and get unlimited access to this title plus top books and audiobooks from O’Reilly and nearly 200 top publishers, thousands of courses curated by job role, 150+ live events each month,
and much more.

Start your free trial

IBM z15 (8561) Technical Guide

Octavian Lascu, John Troy, Jannie Houlbjerg, Frank Packheiser, Paul Schouten, Kazuhiro Nakajima, Anna Shugol, Hervey Kamga, Bo XU

IBM TS7700 Release 5.1 Guide

Larry Coyne, Ole Asmussen, Derek Erdmann, Monica Falcone, Rin Fujiwara, Nobuhiko Furuya, Lourie Goodall, Joe Hew, Kousei Kawamura, Sosuke Matsui, Marcelo Lopes de Moraes, Stefan Neff, Takeshi Nohta, Tomoaki Ogino, Alberto Barajas Ortiz, Aderson Pacini, Michael Scott, Joe Swingler, Taisei Takai, Nao Takemura, Takahiro Tsuda, Chen Zhu

The Virtualization Cookbook for IBM Z Volume 1: IBM z/VM 7.2

Lydia Parziale

ABCs of z/OS System Programming Volume 10

Lydia Parziale, Patrick Oughton, Alvaro Salla

Publisher Resources

ISBN: 0738439436Purchase book