Test EquipmentTest Specification CreationMTP 2 TestingTest ConfigurationExample 1: Initialization (Power-up), Test 1.1Part (a)Part (b)Example 2: Normal Alignment—Correct Procedure (FISU), Test 1.5Part (a)Part (b)Example 3: Individual End Sets Emergency, Test 1.22Example 4: SIO Received During Link In-Service, Test 1.28Example 5: Unexpected Signal Units/Orders in “In-Service” State, Test 2.7Example 6: Link Aligned Ready (Break Tx Path), Test 3.1Example 7: Link Aligned Ready (Corrupt FIBs—Basic), Test 3.2Example 8: Set and Clear LPO While Link In-Service, Test 4.1Example 9: SU Delimitation, Alignment, Error Detection, and Correction, Test 5.1opkiExample 10: Error Rate of 1 in 256—Link Remains In-Service, Test 6.1Example 11, Test 7.1Example 12: Check RTB Full, Test 8.3Example 13: Forced Retransmission with the Value N1, Test 9.3Example 14: Congestion Abatement, Test 10.1MTP 3 TestingTest ConfigurationExample 1: First Signaling Link Activation, Test 1.1Example 2: Load Sharing within a Linkset (All Links Available), Test 2.4.1Example 3: Inaccessible Destination—Due to a Linkset Failure, Test 2.6.1ISUP TestingTest ConfigurationExample 1: CCR Received—Successful, Test 1.4.1Example 2: Overlap Operation (with SAM), Test 2.2.2Example 3: Timers T1 and T5—Failure to Receive a RLC, Test 5.2.3ISUP Supplementary Services TestingTest ConfigurationExample 1: CUG Call with Outgoing Access Allowed and Sent, Test 2.1.1Example 2: CLIP—Network Provided and Sent, Test 3.1.1Example 2: COL—Requested and Sent, Test 6.1.1SCCP TestingTest ConfigurationExample 1: Local DPC and SSN Included, DPC and SSN Available, GT and SSN Included and Sent, Test 1.1.1.1.1.1Example 2: Remote DPC and SSN Included, DPC and/or SSN Unavailable—Return Option Not Set, Test 1.1.1.1.6Example 3: Local DPC and SSN, and SSN Available GT Not Included, SSN Included, Test 1.1.2.2.1.2TCAP TestingTest ConfigurationExample 1: Clearing Before Subsequent Message; Valid Clearing from Initiating Side; Prearranged Ending, Test 1.1.2.1.1 (1)Example 2: First Continue Message; OTID Absent, Test 1.2.2.3 (1)Example 3: Inopportune Reject Component, Test 2.3.2.4 (1)Summary