
42 EFS Systems on a Linux Base: Getting Started
The FSI version of x3270 was modified to allow session binding via the device names that
you place in the FLEX-ES definitions (or in a FLEX-ES mount command).
4.2 Installing the FLEX-ES license key and dongle
Connect the dongle to the USB port. You can check the dongle with the following command:
# cat /proc/bus/usb/devices
On our system, the cat results were as follows:
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=2
B: Alloc = 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev=0.00
S: Product=USB UHCI Root Hub
S: Ser