book

IBM System Storage SAN Volume Controller and Storwize V7000 Best Practices and Performance Guidelines

by Jon Tate, Angelo Bernasconi, Tiago Moreira Candelaria Bastos, Giulio Fiscella, Bruno Garcia Galle, Jana Jamsek, Antonio Rainero

April 2017

Intermediate to advanced

386 pages

12h 26m

English

IBM Redbooks

Read now

Unlock full access

Trademarks
AuthorsNow you can become a published author, too!Comments welcomeStay connected to IBM Redbooks
April 2017, Fifth Edition
1.1 SAN topology general guidelines1.1.1 SAN Performance and scalability1.1.2 ISL Considerations1.2 SAN topology-specific guidelines1.2.1 Single switch SAN Volume Controller/Storwize SANs1.2.2 Basic core-edge topology1.2.3 Edge-core-edge topology1.2.4 Full mesh topology1.2.5 IBM Spectrum Virtualize and IBM Storwize as a SAN bridge1.2.6 Device placement1.3 SAN Volume controller ports1.3.1 Slots and ports identification1.3.2 Port naming and distribution1.4 Zoning1.4.1 Types of zoning1.4.2 Prezoning tips and shortcuts1.4.3 SAN Volume Controller internode communications zone1.4.4 SAN Volume Controller/Storwize storage zones1.4.5 SAN Volume Controller/Storwize host zones1.4.6 Zoning with multiple SAN Volume Controller/Storwize clustered systems1.4.7 Split storage subsystem configurations1.5 Distance extension for remote copy services1.5.1 Optical multiplexors1.5.2 Long-distance SFPs or XFPs1.5.3 Fibre Channel over IP1.5.4 Native IP replication1.6 Tape and disk traffic that share the SAN1.7 Switch interoperability
2.1 Round-robin path selection2.2 Considerations for DS88xx series2.2.1 Balancing workload across DS88xx series controllers2.2.2 DS88xx series ranks to extent pools mapping2.2.3 Determining the number of controller ports for DS88xx series2.2.4 LUN masking2.3 Considerations for IBM XIV Storage System2.3.1 Connectivity considerations2.3.2 Host options and settings for XIV systems2.3.3 Managed disks considerations2.3.4 Additional considerations2.4 Considerations for IBM Storwize V7000/V5000/V37002.4.1 Cabling and zoning2.4.2 Defining internal storage2.5 Considerations for IBM FlashSystem 9002.5.1 Physical FC port connection and zoning2.5.2 Storage capacity and Arrays2.5.3 Extent size2.5.4 Storage pools2.5.5 Volumes2.6 Considerations for third-party storage with EMC VMAX and Hitachi Data Systems
3.1 Availability considerations for storage pools3.2 Selecting storage subsystems3.3 Selecting the storage pool3.3.1 Capacity planning consideration3.3.2 Selecting the number of arrays per storage pool3.3.3 Selecting LUN attributes3.3.4 Considerations for Storwize family systems3.3.5 Considerations for the IBM XIV Storage System3.3.6 IBM FlashSystem A9000/A9000R considerations3.3.7 Considerations for the DS88XX family3.4 Quorum disk considerations3.4.1 IP Quorum3.4.2 IP Quorum requirements3.5 Volume Consideration3.6 Tiered storage3.7 Adding MDisks to existing storage pools3.7.1 Checking access to new MDisks3.7.2 Persistent reserve3.7.3 Renaming MDisks3.8 Rebalancing extents across a storage pool3.9 Removing MDisks from existing storage pools3.9.1 Migrating extents from the MDisk to be deleted3.9.2 Verifying the identity of an MDisk before removal3.9.3 Correlating the back-end volume with the MDisk3.10 Remapping managed MDisks3.11 Controlling extent allocation order for volume creation3.12 Considerations when using Encryption3.12.1 Encryption at rest with USB Key3.12.2 Encryption at rest with Key Server3.12.3 Encryption on external storage
4.1 Overview of volumes4.1.1 Striping compared to sequential type4.1.2 Thin-provisioned volumes4.1.3 Space allocation4.1.4 Compressed volumes4.1.5 Thin-provisioned volume4.1.6 Limits on virtual capacity of Thin-provisioned volumes4.2 Creating volumes4.2.1 Changing the preferred node within an I/O group or cross I/O group4.3 Volume migration4.3.1 Image-type to striped-type migration4.3.2 Migrating to image-type volume4.3.3 Migrating with volume mirroring4.4 VMware Virtual Volumes4.5 Preferred paths to a volume4.5.1 Governing of volumes4.6 Cache mode and cache-disabled volumes4.6.1 Underlying controller remote copy with IBM Spectrum Virtualize and Storwize cache-disabled volumes4.6.2 Using underlying controller FlashCopy with IBM Spectrum Virtualize and Storwize cache disabled volumes4.6.3 Changing the cache mode of a volume4.7 Using IBM Spectrum Virtualize or Storwize with FlashSystem4.8 FlashCopy services4.8.1 FlashCopy rules summary4.8.2 IBM Spectrum Protect Snapshot4.8.3 IBM System Storage Support for Microsoft Volume Shadow Copy Service4.9 Configuration Backup
5.1 Introduction to copy services5.1.1 FlashCopy5.1.2 Metro Mirror and Global Mirror5.1.3 Global Mirror with Change Volumes5.1.4 Volume Mirroring function5.2 FlashCopy5.2.1 FlashCopy use cases5.2.2 FlashCopy capabilities overview5.2.3 FlashCopy functional overview5.2.4 FlashCopy planning considerations5.3 Remote Copy services5.3.1 Remote copy functional overview5.3.2 Remote copy network planning5.3.3 Remote copy services planning5.3.4 Remote copy use cases5.3.5 1920 error5.4 Native IP replication5.4.1 Native IP replication technology5.4.2 IP partnership limitations5.4.3 VLAN support5.4.4 IP Compression5.4.5 Remote copy groups5.4.6 Supported configurations5.4.7 Native IP replication performance consideration5.5 Volume Mirroring5.5.1 Read and write operations5.5.2 Volume mirroring use cases5.5.3 Mirrored volume components5.5.4 Performance considerations of Volume Mirroring5.5.5 Bitmap space for out-of-sync volume copies5.5.6 Synchronization status of volume copies
6.1 Configuration guidelines6.1.1 Host levels and host object name6.1.2 Host cluster6.1.3 The number of paths6.1.4 Host ports6.1.5 Port masking6.1.6 Host to I/O group mapping6.1.7 Volume size as opposed to quantity6.1.8 Host volume mapping6.1.9 Server adapter layout6.2 N-Port ID Virtualization6.3 Host pathing6.3.1 Multipathing Software6.3.2 Preferred path algorithm6.3.3 Path selection6.3.4 Path management6.3.5 Non-disruptive volume migration between I/O groups6.4 I/O queues6.4.1 Queue depths6.5 Host clustering and reserves6.5.1 Clearing reserves6.5.2 IBM Spectrum Virtualize MDisk reserves6.6 AIX hosts6.6.1 HBA parameters for performance tuning6.6.2 Configuring for fast fail and dynamic tracking6.6.3 SDDPCM6.7 Virtual I/O Server6.7.1 Methods to identify a disk for use as a virtual SCSI disk6.7.2 UDID method for MPIO6.8 Windows hosts6.8.1 Clustering and reserves6.8.2 Tunable parameters6.8.3 Guidelines for disk alignment using Microsoft Windows with IBM Spectrum Virtualize volumes6.9 Linux hosts6.9.1 Tunable parameters6.10 Solaris hosts6.10.1 Solaris MPxIO6.10.2 Symantec Veritas Volume Manager6.10.3 DMP multipathing6.10.4 Troubleshooting configuration issues6.11 VMware server6.11.1 Multipathing solutions supported6.11.2 Multipathing configuration maximums6.12 Monitoring6.12.1 Load measurement and stress tools

7.1 Easy Tier7.1.1 Easy Tier concepts7.1.2 Four tiers Easy Tier and Read Intensive flash drive7.1.3 SSD arrays and Flash MDisks7.1.4 Disk tiers7.1.5 Easy Tier process7.1.6 Easy Tier operating modes7.2 Easy Tier implementation considerations7.2.1 Implementation rules7.2.2 Limitations7.2.3 Easy Tier settings7.3 Monitoring tools7.3.1 Offloading statistics7.3.2 Interpreting the STAT tool output7.3.3 IBM STAT Charting Utility
8.1 Generic monitoring8.1.1 Monitoring with GUI8.1.2 Monitoring using quotas and alert8.2 Performance Monitoring8.2.1 Performance monitoring with the GUI8.2.2 Performance monitoring with IBM Spectrum Control8.2.3 Important metrics for debugging8.2.4 Performance support package8.3 Metro and Global Mirror monitoring with IBM Copy Services Manager and scripts8.3.1 Monitoring MM and GM with scripts8.4 Monitoring Tier1 SSD
9.1 Documenting IBM Spectrum Virtualize and SAN environment9.1.1 Naming conventions9.1.2 SAN fabrics documentation9.1.3 IBM Spectrum Virtualize documentation9.1.4 Storage documentation9.1.5 Technical Support information9.1.6 Tracking incident and change tickets9.1.7 Automated support data collection9.1.8 Subscribing to IBM Spectrum Virtualize support9.2 Storage management users9.3 Standard operating procedures9.3.1 Allocating and deallocating volumes to hosts9.3.2 Adding and removing hosts9.4 IBM Spectrum Virtualize code update9.4.1 Current and target IBM Spectrum Virtualize code level9.4.2 IBM Spectrum Virtualize Upgrade Test Utility9.4.3 IBM Spectrum Virtualize hardware considerations9.4.4 Attached hosts preparation9.4.5 Storage controllers preparation9.4.6 SAN fabrics preparation9.4.7 SAN components update sequence9.4.8 IBM Spectrum Virtualize participating in Metro Mirror or Global Mirror9.4.9 IBM Spectrum Virtualize update9.4.10 IBM Spectrum Virtualize disk drive update9.5 SAN modifications9.5.1 Cross-referencing HBA WWPNs9.5.2 Cross-referencing LUN IDs9.5.3 HBA replacement9.6 Hardware upgrades for IBM Spectrum Virtualize9.6.1 Adding IBM Spectrum Virtualize nodes to an existing cluster9.6.2 Upgrading IBM Spectrum Virtualize nodes in an existing cluster9.6.3 Moving to a new IBM Spectrum Virtualize cluster9.6.4 Splitting a Spectrum Virtualize cluster9.7 Adding expansion enclosures9.8 IBM Spectrum Virtualize scripting9.8.1 Connecting to IBM Spectrum Virtualize using predefined PuTTY9.8.2 Run commands in the IBM Spectrum Virtualize shell9.8.3 Scripting toolkit
10.1 Common issues10.1.1 Host problems10.1.2 IBM Spectrum Virtualize events10.1.3 SAN events10.1.4 Storage subsystem issues10.1.5 Port masking issues10.2 Collecting data and isolating the problem10.2.1 Data collection10.3 Recovering from problems10.3.1 Solving host problems10.3.2 Solving IBM Spectrum Virtualize events10.3.3 Solving SAN issues10.3.4 Solving back-end storage issues10.3.5 Replacing a failed disk10.4 Health status during upgrade and known errors
11.1 Evaluate compression savings using Comprestimator11.2 Evaluate workload using Disk Magic11.3 Verify available CPU resources11.4 Configure a balanced system11.5 Standard benchmark tools11.6 Compression with FlashCopy11.7 Compression with Easy Tier11.8 Compression on the backend11.9 Migrating generic volumes11.10 Mixed volumes in the same MDisk group
IBM i Storage managementSingle level storageIBM i response timePlanning for IBM i capacityConnecting SAN Volume Controller or Storwize to IBM iSetting of attributes in VIOSDisk drives for IBM iDefining LUNs for IBM iData layoutFibre Channel adapters in IBM i and VIOSZoning SAN switchesIBM i MultipathBoot from SANIBM i mirroringCopy services considerations
Business Continuity with Stretched ClusterBusiness Continuity with Enhanced Stretched ClusterBusiness Continuity with HyperSwapIP quorum configuration
IBM RedbooksOther resourcesReferenced websitesHelp from IBM

Content preview from IBM System Storage SAN Volume Controller and Storwize V7000 Best Practices and Performance Guidelines

Related publications

The publications listed in this section are considered particularly suitable for a more detailed discussion of the topics covered in this book.

IBM Redbooks

The following IBM Redbooks publications provide more information about the topics in this book. Note that some publications that are referenced in this list might be available in softcopy only:

•Implementing the IBM System Storage SAN Volume Controller with IBM Spectrum Virtualize V7.6, SG24-7933

•Implementing the IBM Storwize V7000 and IBM Spectrum Virtualize V7.6, SG24-7938

•IBM b-type Gen 5 16 Gbps Switches and Network Advisor, SG24-8186

•Introduction to Storage Area Networks, SG24-5470

•IBM SAN Volume Controller and IBM FlashSystem 820: Best Practices and Performance ...

Become an O’Reilly member and get unlimited access to this title plus top books and audiobooks from O’Reilly and nearly 200 top publishers, thousands of courses curated by job role, 150+ live events each month,
and much more.

Start your free trial

IBM System Storage SAN Volume Controller Best Practices and Performance Guidelines

Mary Lovelace, Katja Gebuhr, Ivo Gomilsek, Ronda Hruby, Paulo Neto, Jon Parkes, Otavio Rocha Filho, Leandro Torolho

IBM System Storage SAN Volume Controller, IBM Storwize V7000, and IBM FlashSystem 7200 Best Practices and Performance Guidelines

Jon Tate, Tiago Moreira Candelaria Bastos, Jon Herd, Sang-hyun Kim, Sergey Kubin, Dirk Peitzmann, Antonio Rainero

IBM SAN Volume Controller Best Practices and Performance Guidelines

Anil K Nayak, Antonio Rainero, Barry Whyte, Chris Hoffmann, Danilo Morelli Miyasiro, David Green, Duane Bolland, Jackson Shea, Jon Herd, Jordan Fincher, Marcelo Avalos, Sergey Kubin, Sidney Varoni Junior, Thales Noivo Ferreira, Vasfi Gucer

IBM SAN Volume Controller Best Practices and Performance Guidelines for IBM Spectrum Virtualize Version 8.4.2

Antonio Rainero, Carlton Beatty, David Green, Hartmut Lonzer, Jonathan Wilkie, Kendall Williams, Konrad Trojok, Mandy Stevens, Nezih Boyacioglu, Nils Olsson, Renato Santos, Rene Oehme, Sergey Kubin, Thales Noivo Ferreira, Uwe Schreiber, Vasfi Gucer

Publisher Resources

ISBN: 9780738442433Purchase book