Materials and Surface Engineering

Table of Contents

1. Cover image
2. Title page
3. Table of Contents
4. Copyright
5. List of figures
6. List of tables
7. Preface
8. About the contributors
9. Chapter 1: Scratch resistance of modified polymethylmethacrylate nanocomposites
   1. Abstract:
   2. 1.1 Introduction
   3. 1.2 Experimental data
   4. 1.3 Scratch resistance
   5. 1.4 Wear mechanisms
   6. 1.5 Conclusions and future work
   7. 1.6 Acknowledgements
10. Chapter 2: Nanomechanical properties and nanoscale deformation of engineering metals and alloys
    1. Abstract:
    2. 2.1 Introduction
    3. 2.2 Experimental data
    4. 2.3 Results and discussion
    5. 2.4 Conclusions
11. Chapter 3: Analysis of large-strain microindentation of crystalline polymers
    1. Abstract:
    2. 3.1 Introduction
    3. 3.2 Experimental data
    4. 3.3 Analysis of large-strain microindentation deformation
    5. 3.4 Estimates of plastic properties of crystalline polymers by large-strain indentation
    6. 3.5 Conclusions
12. Chapter 4: Nanocomposite coatings: A review
    1. Abstract:
    2. 4.1 What are nanocomposite coatings?
    3. 4.2 Main synthesis methods
    4. 4.3 Coating properties and characterization
    5. 4.4 Nanocomposite polymer coatings
    6. 4.5 Recent developments and industrial applications
    7. 4.6 Future trends
13. Chapter 5: Thermal sprayed WC-Co coatings for tribological application
    1. Abstract:
    2. 5.1 Introduction
    3. 5.2 Thermal spray techniques
    4. 5.3 Characteristics of WC-Co coatings
    5. 5.4 Tribological performances of WC-Co coatings
    6. 5.5 Applications of WC-Co coatings
    7. 5.6 Future trends
14. Chapter 6: Tribological performance of electroless Ni-P coatings
    1. Abstract:
    2. 6.1 Introduction
    3. 6.2 Friction behavior of electroless Ni-P coatings
    4. 6.3 Wear behavior of electroless Ni-P coatings
    5. 6.4 Electroless nickel bath characteristics and role of individual components
    6. 6.5 Optimization of tribological performance of electroless Ni-P coatings
    7. 6.6 Conclusions
15. Chapter 7: Tribological response of materials during sliding against various surface textures
    1. Abstract:
    2. 7.1 Introduction
    3. 7.2 Experimental details
    4. 7.3 Results
    5. 7.4 Discussion
    6. 7.5 Conclusions
16. Chapter 8: Laser straight cutting of Ti-6Al-4V alloy: Temperature and stress fields
    1. Abstract:
    2. 8.1 Introduction
    3. 8.2 Heating and stress analysis
    4. 8.3 Experimental data
    5. 8.4 Results and discussion
    6. 8.5 Conclusions
    7. 8.6 Acknowledgements
17. Index