Penetration Testing: A Survival Guide

Configuring the AVD

Now the AVD has to be configured in such a way that traffic from the device goes through the proxy:

1. Navigate to Home | Menu | Settings | Wireless & networks | Mobile Networks |Access Point Names.
2. Here we will configure the following proxy settings:
   • Proxy
   • Port

   The following figure shows the IP address of the workstation. This is required to configure the AVD:

   
3. Enter the IP address of the system here:
   
4. After entering the IP address of the system, enter the port number, 8080, as shown here:

Once this is done, all the HTTP traffic from the device ...