
3. Hold the ribbon cable into the CSI connector and press the
moving part of the CSI connector down to lock and hold the rib-
bon cable in place. You’ll still see part of the metal contacts on
the ribbon cable.(See Figure 9-5.)
Figure 9-5.
After placing the ribbon cable into the camera serial
interface connector and locking it down, you may still see metal
contacts on the ribbon cable.
4. Power up the Raspberry Pi and open the Configuration tool
from the desktop Menu→Preferences. (See Figure 9-6.)
144 Getting Started with Raspberry Pi
GSW_RASPI_4ED_FIN.indd 144GSW_RASPI_4ED_FIN.indd 144 10/28/21 10:54 AM10/28/21 10:54 AM