NEW TOPICS IN THIS CHAPTER
- ■ Making measurements
- ■ Sawing with a miter box
- ■ Smoothing edges with sandpaper
- ■ Gluing and clamping
- ■ Finishing with polyurethane
YOU WILL NEED
- ■ Tenon saw with hardened teeth
- ■ Miter box
- ■ Trigger clamps, quantity 2
- ■ Ruler, 18", stainless steel, cork back, calibrated in inches and millimeters
- ■ Speed square, 7"
- ■ Rubber sanding block
- ■ Work gloves
- ■ Dust mask (optional)
- ■ Safety glasses (optional)
- ■ Square dowel, ¾ " x ¾ ", length 36"
- ■ Plywood, ¾ " or less, as a work surface, size 24" x 24" or larger (Masonite is acceptable)
- ■ Carpenter’s glue, 8 ozt
- ■ Sandpaper, 80 grit, 9" x 11" sheets, quantity 3
- ■ Polyurethane, 1 pint
- ■ Cardboard, any thickness, size 9" x 9"
- ■ Disposable ...