NEW TOPICS IN THIS CHAPTER
- ■ How to drive nails
- ■ Inserting nails to a uniform depth
- ■ Drawing a pattern
- ■ Types of nails
- ■ Types of hammers
YOU WILL NEED
- ■ Claw hammer, between 8 ounces and 16 ounces (see text for discussion)
- ■ Pliers, long-nosed preferred, generic slip- joint acceptable
- ■ Two-by-four pine, any condition, 12"
- ■ One-by-six pine, no knots, not warped, 12"
- ■ Square dowel, ¾" x ¾", length 3"
- ■ Finishing nails, 1¼", 1 lb box
- ■ Marbles, 9/16" diameter (14mm), quantity 20
- ■ Half-inch masking tape
Also, as listed previously: Tenon saw, utility saw (optional), awl, trigger clamps, ruler, speed square, rubber sanding block, work gloves, dust mask (optional), safety glasses (optional), plywood work surface, ...