NEW TOPICS IN THIS CHAPTER
- ■ Types of screws
- ■ Types of screwdrivers
- ■ How to design in 3D
- ■ Types of corner joints
YOU WILL NEED
- ■ Two-by-four pine, any condition, length 18"
- ■ Square dowel, hardwood, 1/2" x 1/2", length 18" Square dowel, 3/4" x 3/4", length 3"
- ■ Plywood, 1/4" thick, size 12" x 18"
- ■ Wood screws, #6 x 5/8", flat head, Phillips, quantity 20
- ■ Wood screws, #10 x 1", flat head, Phillips, quantity 3 (optional)
- ■ Screwdriver, Phillips size 2, or electric screwdriver and bits (optional)
Also, as listed previously: Tenon saw, miter box, trigger clamps, ruler, speed square, rubber sanding block, work gloves, awl, masking tape, utility knife, electric drill and drill bits, countersink, dust mask (optional), ...