
me in the U.S.), and of course the Fona should
be inserted into the socket on the main board.
Some care should be taken to be sure cables
for the LiPo battery and the SMA connector are
routed well and that the battery is nestled next
to the Fona so that the back of the enclosure
will fit, and there’s a tricky process involved in
mating the FPC connector to the eInk Friend
daughterboard.
With the main board installed and the rotary
dial sticking out the other side of the enclosure,
we can install the back of the enclosure and finish
bonding the e-paper display in place, this time
using simple double-sided tape, which permits
H
you to remove ...