
your resolution to 720p (the Pi can’t handle higher
resolutions), your frame rate to 25fps, and your
gain and exposure time.
Next, the camera’s IP address needs to be
set to 192.168.42.10.
5. SET UP THE RASPBERRY PI
Flash your SD card with one of the pre-built RMS
images from makezine.com/go/RMS-images,
or install the RMS code from scratch on an
existing Raspbian installation, from github.com/
CroatianMeteorNetwork/RMS.
Then boot the Pi, set up Wi-Fi, and answer
the questions that appear in the RMS_FirstRun
terminal window. Once you’ve done this, you’ll
make the necessary changes to the configuration
file (see READ-RPi4_note.txt on the Desktop). ...