
146 EFS Systems on a Linux Base: Additional Topics
/dev/sg0. Note that FLEX-ES uses the /dev/sgx node interface, not the /dev/stx node
interface.
If you are not certain that you have the correct name, you can try:
# /sbin/scsi_info /dev/sg1
SCSI_ID=”0,1,0”
MODEL=”FUJITSU M1016B M2483B”
FW_REV=”0014”
The output from this command should verify that you have the correct sg number.
Linux tape utilities use names such as /dev/st0 and /dev/st1. Unfortunately, the numeric part
of the
sg and st name is not necessarily the same for a given drive; you may need to
experiment a little to find the correct
st number. Also, remember to turn on external drive(s) ...