T1: A Survival Guide

The Original Superframe

In the beginning, T1s were deployed to users as high-capacity voice trunks and were terminated by devices called channel banks. Western Electric called the first channel bank, which was first placed in service in 1962, the D1. Later channel banks received successively higher numbers: the D2 channel bank was introduced in 1969, the D3 was completed in 1972, and the D4 made its debut in 1976. Each new product introduced new features. With the D2 channel bank, Western Electric introduced the superframe (SF) standard. Some manuals may refer to the SF format as the D4 format, which is somewhat erroneous—the D2 channel bank was sold in the late 1960s, long before the D4 channel bank became commonplace nearly twenty years later. Superframe formatting groups 12 channels together into a single structure called a superframe, as shown in Figure 4-2.

Figure 4-2. The superframe

24 DS0 channels are bundled into frames. Twelve frames are then put together to form one superframe. The framing bits from the 12 constituent frames form a frame bit sequence, which is always 100011011100, as Figure 4-2 shows. Odd bit positions in the superframe are terminal framing bits, abbreviated F_t(101010), and even bit positions are signaling framing bits, abbreviated F_s(001110).

Alarms and the Superframe

AT&T’s introduction of the D2 channel bank brought link monitoring ...