
OPTION CPUSPEED 250000
OPTION DISPLAY 50, 132
OPTION LCDPANEL ST7735S,
LANDSCAPE,GP8,GP12,GP9,GP25
4. WIRE UP THE BOARD
All of the above can be done without doing any
wiring! In order to use the PicoScope, you’ll need
to connect the analog input to either the test
signal, or to some other 0–3.3V signal source
(Figure
A
).
Gently insert the RP2040-LCD-0.96 into the
breadboard. If you’re using the nice Adafruit
Solderless Breadboard for Raspberry Pi Pico, be
sure to align pins 1 and 40 with the appropriate
rows so that the pin labels are correct.
To see the test signal, insert a wire between
pins 24 and 31. Either use a plug wire from your
junk box, ...