Make: Volume 78

with water and check for any leaks. If any holes

are found these can be filled in with epoxy filler

prior to use.

5. ASSEMBLY

Assembly requires patience and five lengths of

wire: 1 short (~11cm) and 4 long (~20cm each).

Start with the suspension points at the apex of

the pyramid forms. File a small notch at one point

in the circumference of each hole.

Thread the short wire through the hole in the

apex, allowing 3cm excess, and fit an M2.5 screw;

this will grip the wire and retain the screw in the

hole. Wrap the excess wire around the screw

at the bottom of the screw head. Allow 5cm of

suspension between pyramids, and repeat the

same process on ...