
TCON is the timer/counter control register and this register is bit addressable.
For example, bit 4 of TCON is the counter 0 run control bit and setting this bit
starts counter 0. TCON register is at address 88 (hex) and bits in this register
can be accessed either by making reference to the address or by using compiler
reserved names (e.g. TR0).
TMOD is the timer/counter mode control register. This register sets the
operating modes of the two timer/counters as shown in Table 1.3. There are
three operating modes, known as modes 0, 1, and 2. TMOD is not bit
addressable and should be loaded by specifying all the 8 bits. For example,
loading hexadecimal ...