CHAPTER 6
RS232 SERIAL COMMUNICATION PROJECTS
RS232 is a serial communications standard which enables data to be
transferred in serial form between two devices. Data is transmitted and
received in serial `bit stream' from one point to another. Standard RS232 is
suitable for data transfer to about 50 m, although special low-loss cables can be
used for extended distance operation. Four parameters specify an RS232 link
between two devices. These are baud rate, data width, parity, and the stop bits,
and are described below:
.
Baud rate: the baud rate (bits per second) determines how much informa-
tion is transferred over a given time interval. A baud rate can usually be
selected between 110 and 76 800 baud, e.g. a baud rate of 9600 corresponds
to 9600 bits ...