
If the button is not pressed (button = 1), the value of DICE is incremented
until it is 7 and then set back to 1.
Components Required
In addition to the components used for the basic microcontroller circuit, the
following components will be required:
Display TIL311 type hexadecimal display
R2 100K, 0.125 W resistor
PROJECT 9 ± 7 Segment Display Driver
Function
This project shows how a 7 segment display can be interfaced to a micro-
controller. In this project, a 7 segment display is connected to port 1 of the
microcontroller and a program is written to count up from 0 to 9 and display
the data on the 7 segment display. The program runs in an endless loop ...