
. Two external interrupts (INT0 and INT1)
. Two timer interrupts (timer 0 and timer 1)
. One serial port receive interrupt
. One serial port transmit interrupt
Each interrupt is assigned a ®xed location in memory and an interrupt causes
the CPU to jump to that location, where it executes the interrupt service
routine. Table 1.5 gives the interrupt sources and the start of their service
routines in memory. Note that the serial port receive and transmit interrupts
point to the same location.
Each interrupt source can be individually enabled or disabled by setting or
clearing its interrupt enable bit. Table 1.6 gives the interrupt enable bit
patterns.
1.9 ...