book

Surface Engineering of Light Alloys

by H Dong

May 2010

Intermediate to advanced

680 pages

20h 43m

English

Woodhead Publishing

Read now

Unlock full access

Abstract:1.1 Introduction1.2 Corrosion behavior of magnesium (Mg) alloys1.3 Corrosion mitigation strategy1.4 Future trends1.5 Acknowledgements
Abstract:2.1 Introduction2.2 Classification of aluminium alloys2.3 Composites2.4 Introduction to wear2.5 Sliding wear of aluminium alloys2.6 Wear maps2.7 Future trends
Abstract:3.1 Introduction3.2 Wear behaviour of titanium alloys3.3 Wear of titanium-aluminium intermetallics3.4 Conclusions3.5 Acknowledgements

Abstract:4.1 Introduction4.2 Formation of anodic films4.3 Structural evolution of anodic films4.4 Practical anodising processes4.5 Pre-treatment processes4.6 Anodising equipment4.7 Post-treatment processes4.8 Anodising magnesium4.9 Anodising titanium4.10 Future trends
Abstract:5.1 Introduction5.2 Fundamentals of the PEO process5.3 PEO power sources and process parameters5.4 Properties and applications of PEO coatings5.5 New process exploration5.6 Future trends5.7 Acknowledgements
Abstract:6.1 Introduction6.2 Plasma electrolytic oxidation (PEO) treatments of magnesium (Mg) alloys6.3 Microstructure of PEO-treated Mg alloys6.4 Properties of PEO-treated Mg alloys6.5 Recent developments in PEO treatments of Mg alloys6.6 Industrial PEO processes and applications6.7 Summary
Abstract:7.1 Introduction7.2 Characteristics of thermal spraying7.3 Introduction to physics and chemistry of thermal spraying7.4 Microstructure and properties of thermal spray coatings7.5 Bonding between coating and substrate7.6 Case studies7.7 Future trends7.8 Acknowledgements
Abstract:8.1 Introduction: General features of cold spraying (CS)8.2 Potential applications of CS technique8.3 CS of aluminium (Al) and its alloys8.4 CS of titanium (Ti) and its alloys8.5 Surface modification of magnesium alloys by CS8.6 Future trends
Abstract:9.1 Introduction9.2 Surface engineering of magnesium alloys9.3 Ion beam assisted deposition (IBAD) and reactive ion beam assisted deposition (RIBAD)9.4 Effects of ion bombardment9.5 RIBAD deposition of titanium nitride (TiN) on magnesium alloys9.6 Sliding wear and aqueous corrosion of Mg alloys9.7 Conclusion
Abstract:10.1 Introduction10.2 Effect of plasma on surface oxide film10.3 Plasma nitriding of Al alloys10.4 Physical vapour deposition (PVD) of aluminium alloys10.5 Duplex surface treatment10.6 Load bearing capacity and interface design10.7 Summary
Abstract:11.1 Introduction11.2 Processes and advantages of plasma immersion ion implantation (PIII)11.3 PIII surface modification of titanium (Ti) alloys11.4 PIII surface modification of magnesium (Mg) alloys11.5 PIII surface modification of aluminum (Al) alloys11.6 Future trends
Abstract:12.1 Introduction12.2 Lasers used in surface engineering12.3 Laser surface modification methods12.4 Laser processing conditions for surface engineering12.5 Laser surface melting and cladding12.6 Laser surface alloying12.7 Effect of laser surface modification on properties12.8 Summary12.9 Acknowledgements
Abstract:13.1 Introduction13.2 General considerations on the laser processing of light alloys13.3 Laser surface remelting of light alloys13.4 Laser surface alloying of light alloys13.5 Laser surface cladding of light alloys13.6 Laser surface particle composite fabrication processes13.7 Laser shock treatment of Al alloys13.8 Future trends13.9 Sources of further information and advice
Abstract:14.1 Introduction14.2 Ceramic conversion treatment (CCT) of titanium and titanium alloys14.3 CCT for TiAl intermetallics14.4 CCT of TiNi shape memory alloys14.5 Summary and conclusions14.6 Future trends14.7 Acknowledgements
Abstract:15.1 Introduction15.2 Duplex surface treatment of titanium (Ti) alloys15.3 Load bearing capacity of duplex surface treatments15.4 Tribological properties of duplex surface treatments15.5 Erosion performance of duplex surface treatments15.6 Duplex surface treatment based on diamondlike carbon (DLC) or titanium nitride (TiN) films with plasma nitriding15.7 Duplex surface coating with oxygen diffusion inlayer15.8 Other duplex surface treatments for titanium alloys15.9 Duplex surface treatment of aluminium (Al) alloys15.10 Summary
Abstract:16.1 Introduction16.2 Light alloys in sports equipment16.3 Surface engineering in sports equipment16.4Summary16.5Acknowledgements
Abstract:17.1 Introduction17.2 Surface engineering of titanium (Ti) and its alloys for cardiovascular devices17.3 Surface engineering of Ti alloys for orthopedics and dental implants17.4 Future trends17.6 Acknowledgements
Abstract:18.1 Introduction18.2 Aluminium (Al) alloys for aerospace applications18.3 Requirements from engineering components in space18.4 Advanced coatings and multi-functionality18.5 Environmental aspects of engineering components in space18.6 Most commonly used coating processes for Al alloys18.7 PEO and anodised coating characteristics and properties18.8 PEO applications18.9 Summary