Hands-On Embedded Programming with C++17

The hardware

For the project, we will use a Fleasystems FleaFPGA Ohm board (http://fleasystems.com/fleaFPGA_Ohm.html). This is a small, sub-$50, sub-€40 FPGA development board in a Raspberry Pi Zero form factor:

It has the following specifications:

• Lattice ECP5 FPGA with 24K LUT elements and 112KB Block RAM.
• 256-Mbit SDRAM, 16 bits wide and 167 MHz clock.
• 8-Mbit SPI Flash ROM for FPGA configuration storage.
• 25 MHz Crystal oscillator.
• HDMI video out (up to 1080p30 or 720p60 screen modes possible).
• μSD card slot.
• Two micro USB host ports with alternate PS/2 host port functionality.
• 29 user GPIO, including 4 x medium-speed ADC inputs and 12 ...