Learning AWS IoT

Connecting AWS IoT Button to a network

In this section, we will connect our AWS IoT Button to a network. Consider the following steps:

1. Firstly, press the button on the AWS IoT Button hardware until you see a blinking blue LED on the hardware. Then, you should see SSID Wi-Fi from AWS IoT Button, with the name Button ConfigureMe - XXX:

2. To connect to the AWS IoT Button Wi-Fi, you should enter the SSID pin which is eight digits. You can find it on the back of AWS IoT Button, as shown in the following screenshot. Take eight digits from the back, for instance 1234KL34. Remove the space:

3. After connection, you can open a browser and navigate ...