Chapter Seven. 2D Drawing Representation
Objectives
After studying the material in this chapter, you should be able to:
1. Represent curved surfaces in multiview drawings.
2. Show intersections and tangencies of curved and planar surfaces.
3. Represent common types of holes.
4. Show fillets, rounds, and runouts in a 2D drawing.
5. Use partial views.
6. Apply revolution conventions when necessary for clarity.
7. Show removed views and projected views.
8. Show right- and left-hand parts.
9. Project curved surfaces by points.
10. Show and label an enlarged detail.
11. Show conventional breaks.
Refer to the following standards:
• ANSI/ASME Y14.3 Multiview and Sectional View Drawings
The CoWorker robot is a 3′-high Pentium powered robot that ...
Get Technical Drawing with Engineering Graphics, 15th Edition now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.
