
Abnormal ARP Traffic Detection and Prevention ◾ 85
The following screenshot shows the content of the DHCP
snooping database.
3.6.3.3 Step 2: Configure Dynamic ARP
Inspection for a DHCP Environment
To configure the Dynamic ARP Inspection, type the follow-
ing commands:
Switch>enable//enter the enable command to access
privileged EXEC mode
Switch#configure terminal//enter global
configuration mode
Switch(config)#ip arp inspection vlan 1//enable
dynamic ARP inspection on vlan 1
Switch(config)#end//return to privileged EXEC mode
Switch#show ip arp inspection vlan 1//verify the
dynamic ARP inspection configuration
Switch#show ip arp inspection statistics vlan ...