
Appendix B. xCAT configuration tables 203
apcp.tab
This table gives xCAT the ability to power on or off any equipement connected to
the APC MasterSwitch Plus. It is intended for equipment that is not controlled by
an MPA card (network switch, Equinox, Myrinet switch, etc.).
If your nodes do not use MPA hardware but they are connected to an APC
MasterSwitch Plus, then you still are able to control them through entries in this
table.
Example B-7 is the description of the apcp.tab table.
Example: B-7 Description of apcp.tab table
Equipment ApcToUse,ApcUnitNumber,ApcPortNumber
Table B-9 Definition of apcp.tab parameters
Parameter Description Possibl ...